Table of Contents
Advertisement
1.4 Spindle Motor Start/Stop
This controller of the drive senses the disc to be set on the turn-table
connected with the spindle motor and then starts to rotate the spindle
motor, in response to the host computer command.
1.5 Seek Motor
The controller of the drive starts to move the optical pick up carriage, in
response to the host computer command.
1.6 Eject Button
Operator can eject the Disc Tray (Disc) by pushing this button.
1.7 Busy indicator
When the disc tray or disc is being accessed, the light shines or flashes
orange.
Even when a disc is loaded or a disc is not being accessed, the light go
out.
When a illegal disc is loaded or some hardware trouble occurs, the
indicator blinks.
2. Basic Specification
Type: Tray Type
Supported Function (Write/Read/Play)
18
Advertisement
Table of Contents
