Table of Contents
Advertisement
Technical Specifications
Dimensions:
Height x Width x Depth (in cm)
Maximum absorbed power:
Motor absorption:
Lighting:
Length of the cable:
Mounting accessories included
1 Reduction flange Ø 150-125
1 Deflector
6 Wood-screws 6 x 70 mm
6 Wall plugs Ø 10 mm
10 Nuts
8 Metal-screw 3 x 9 mm
14 Metal-screw 4 x 8 mm
10 Metal-screw 4 x 7 mm
Electrical connection
Safety warnings for the electrician
The electric outlet should be placed on the wall inside the chimney. The
hood has a power cable, 150 cm, with earth connection and the rated
voltage is
220 - 240 V.
Connect the hood to the mains supply via a double pole switch
which has 3 mm minimum separation between the contacts.
The switch must be accessible at all times.
The following is valid in the United Kingdom only:
- the wire which is coloured green and yellow must be connected to
the terminal which is marked with the letter E or by the earth symbol
(
), or coloured green or green and yellow;
- the wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black, -
- the wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
16
80-106,5 x 100 x 65
250 W
1 x 170 W
4 x 20 W
150 cm
Advertisement
Table of Contents
