Figure 13: Connecting The Power Supply To The Charger; Figure 14: Battery Charger With Battery - Advanced Bionics Platinum Series User Manual

Sound processor
Hide thumbs Also See for Platinum Series:
Table of Contents

Advertisement

To charge the lithium ion rechargeable batteries:
• Place charger on a flat surface.
• Connect the power supply cord to the power supply. Connect the cable from the
power supply to the charger. Plug power supply cord into power outlet.

Figure 13: Connecting the Power Supply to the Charger.

• Gently insert one or two rechargeable batteries in the charger so that the con-
tacts on each battery match up with the contacts in the charger. The charger is
designed so that batteries will only insert in one direction.

Figure 14: Battery Charger with Battery.

• The batteries will start charging automatically.
• If a partially charged battery is placed in the charger, the battery may be fully
charged in a shorter period of time. The battery can be removed at anytime.
The charger and batteries will not be damaged if the batteries are left in the
charger longer than the required charging time (approximately 3.5 hours). It
is a good idea to use the batteries on a rotating basis to maximize battery life.
Batteries can be labeled (e.g., 1, 2, 3) to keep track of the rotation.
User Guide for the Platinum Series Sound Processor 17

Advertisement

Table of Contents
loading

Table of Contents