Cable; Figure 10: Headpiece With Cable - Advanced Bionics Platinum Series User Manual

Cable

The cable connects the headpiece to the processor and provides the pathway for
relaying information between the internal and external components of the sys-
tem. Cables are available in multiple lengths in either beige or brown. Each cable
includes a small clip that can be used with clothing to help hold the cable in place.
At one end of the cable is a two-pin plug that is inserted into the headpiece. Please
note that the pins are of different diameters and must be inserted correctly. A small
coaxial plug is located at the other end of the cable. This plug is inserted into the
headpiece jack on the processor.
To remove the cable from the headpiece, always hold the cable's strain relief (the
plastic plug) and gently pull it away. The cable should be removed from the head-
piece only when it is being replaced.

Figure 10: Headpiece with Cable.

NOTE: Be sure the processor is turned off before removing the cable from
the headpiece.
User Guide for the Platinum Series Sound Processor 13