Updating The Bios File - Asus H61M-PRO User Manual

Updating the BIOS file

To update the BIOS file using BIOS Updater:
At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
1.
2. The BIOS Updater screen appears as below.
BOARD:
VER:
DATE:
PATH:
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
3. Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys
to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
4. Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
•
•
2-4
ASUSTek BIOS Updater for DOS V1.30
Current ROM
H61M-PRO
0205
10/04/2013
A:\
H61MPRO.CAP
[Tab] Switch
[B] Backup
For BIOS Updater version 1.30 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit menu. Refer to section 2.9
Exit menu for details.
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
8390656 2013-10-04 17:30:48
[V] Drive Info
[Esc] Exit
Chapter 2: Getting started