Table of Contents
Advertisement
typically consumes approximately 13.8 watts (1 amp @ 13.8Vdc). The mixer will
consume up to a worst case of about 19 watts when all LED's are lit.
This is
unlikely in normal use.
DO NOT SUPPLY THE SOLICE MIXER WITH DC VOLTAGES THAT ARE IN
EXCESS OF 18VOLTS DC!
DAMAGE TO THE MIXER WILL RESULT AND
THIS DAMAGE WILL NOT BE REPAIRED UNDER WARRANTY.
Multi-Pin Connector
The rear panel of the Solice Mixer is equipped with a DB-37 Female connector.
This connector provides a parallel set of the eight main balanced outputs, eight
tape returns, and various DC voltages for powering auxiliary equipment.
For
those users who will be sending the 8 main outputs to an eight track recorder,
you can use the DD-37 pin connector rather than eight individual XLR cables.
This connector is also used for tape return functions. We included DC power on
this connector for possible future product expansion modules made by PSC.
20
Advertisement
Table of Contents
