Table of Contents
Advertisement
Main Output Faders
The Solice mixer is equipped with four main output faders. These faders are
stereo faders and each one controls two main outputs. Thus all eight main
outputs are controlled with only four faders.
They are arranged in stereo pairs
for ease of use in providing stereo sends to multiple cameras and other
challenging setups.
Rear Panel View
MULTI-PIN, HEADPHONE FEEDS, COMM INPUTS, REMOTE ROLL,
CHANNEL OUTPUTS
EXTERNAL POWER, MAIN OUTPUTS,
INPUTS
Main XLR Outputs
The Solice Mixer is an eight buss mixer and thus has eight main balanced
outputs.
The balanced outputs are located on the rear panel of the mixer and
utilize standard 3 pin male XLR connectors.
These outputs offer exceptional
headroom with a clipping level of approximately +24dB.
Based on a nominal
output level of +4dBm, you still have 20dB of headroom before clipping occurs.
These balanced outputs are also very low noise for use with today's modern
digital recorders. They offer an output impedance of 50 ohms and are designed
to operate into loads of 600 ohms or greater.
External Power Connection
The Solice mixer is powered from any source of external DC with a voltage range
of 10 to 18Vdc.
The Solice is a negative ground chassis.
External power is
applied to the Solice mixer via the 4 pin male external power connector located
on the rear panel of the mixer. Pin 1 is Ground and Pin 4 is 10 to 18Vdc. The
mixer will operate from +10 to +18 volts DC without any adjustment or
compromise in specifications.
There are no advantages to operating the mixer
from 18 Vdc over that of 12Vdc as found on some other designs.
The mixer
19
Advertisement
Table of Contents
