Channel Ganging - Professional Sound Corporation Solice Operation Manual

Switched to the Center position, it switches off the audio to the dedicated line
output. Switched to the Right, the dedicated line output is fed Post-fader audio.
The Line output level pot controls the level of the dedicated line output. It allows
full control of the audio level from full off (counter clock-wise) to fully on (fully
clock-wise) or anywhere in between.

Channel Ganging

Input channels 1 and 2 and also input channels 3 and 4 can be ganged together
into stereo pairs for ease of use in making stereo recordings. This is useful
when working in both XY and MS configurations. There is a simple ganging
switch located between each of these channels. It is labeled "GANG" and "SEP".
In the Separate position, the input channels operate as standard mono inputs
and they have no effect on each other. When set to the Ganged position, the
first channel fader of the stereo pair will control the level of the entire stereo pair.
Thus, when inputs 1 and 2 are ganged together, fader 1 will have control over
both inputs 1 and 2. The same is true when inputs 3 and 4 are ganged together.
Fader #3 will have control over inputs 3 and 4. For those times when you are
using a stereo microphone or a stereo pair of mono microphones, this ganged
input fader will allow you to make level adjustments while recording without
affecting the stereo image.
13