Jenn-Air 720-0142-LP Instructions Manual page 10

SIDE VIEW FOR BUILT-IN OPENING
To ensure proper combustion.1 7/8 in.(47.6mm)
sp ace is needed between the bottom of the
qr ease tray andthe island material.
The following are minimum clearances necessary around the Jenn-Air built-in 5 burner
grills (Item numbers: 168935/168934):
Rear Clearance: 3 in. to non-combustible materials
24 in. to combustible materials
Combustion gap below control panel: 1 3/4 in.
26 1/4 in.(666.7mm)
24 6/8 in.(628.6mm)
8
A minimum of 3 in.(76.2mm) is
required between the back of the grill
and any non-combustible material.
A minimum of 24 in.(609.6mm)is
required between the back of the grill
and any combustible material.