Installation - DeLonghi Microwave oven Manual

GB-069IDL 8-04-2004
M O D E L W I T H A 2 3 - L I T R E C AV I T Y
Outer measurements (LxDxH)
Inner measurements (LxDxH)
Approximate weight
Turntable diameter
Oven light
For additional data, consult the serial plate glued to the back of the equipment.
This equipment is in compliance with EEC Directives 89/336 and 92/31 related to Electromagnetic Compatibility.
E L E C T R I C A L
Connect this equipment only to electrical outlets
having a capacity of at least 10A.
Before using this oven, check to make certain
that the electrical network is the same as that
indicated on the equipment's data plate and that
• Electrical Connection for UK only . . . . .see page 30
1) After having removed the oven from its box, check to make certain that the turntable spindle (B)
is correctly fitted into its housing. Place the turntable support (E) in the middle of the cooking
chamber and set the turntable (D) on top of it. The spindle (B) must be inserted in the related
turntable housing.
20 cm
portions and the walls to the side and the back, and a free space
of at least 20 cm. above the oven (see Fig. 1).
4) Never block up or otherwise obstruct the air outlet holes. In particular, never place anything on
the oven and check to be certain that the air and steam outlet slots (located atop the oven) are
ALWAYS FREE (see Figs. 2 and 3).
5) DO NOT remove the transparent film on the inner surface of the door.
22
16:25 Pagina 22
T E C H N I C A L
508x305x414
350x215x330
16 kg.
31,5 cm
20 W
B O T H
I N S T A L L A T I O N
2) Check to make certain that this
equipment has not been
damaged in transport and
check especially to see if the
door opens and closes
5 cm
correctly.
3) Place this oven on a
surface so that there remains a
space of about 5 cm.
fig. 1
between the oven's surface
D A T A
M O D E L W I T H A 1 7 - L I T R E C AV I T Y
Outer measurements (LxDxH)
Inner measurements (LxDxH)
Approximate weight
Turntable diameter
Oven light
M O D E L S
C O N N E C T I O N S
the electrical outlet is connected to an efficient
grounding (earth) terminal. The manufacturer
shall not be responsible in any manner what-
soever for harm or damage caused by failure
to observe this norm.
air outlet
air outlet
458x295x380
300x206x284
14 kg.
27 cm
25 W
QQ QQ ;; ;;
air outlet
QQ ;;
air
intake
fig. 2
air
intake
fig. 3