Setting Up Your Tv; Connecting The Aerial And Vcr - JVC AV-28T4SP Instructions Manual

Setting up your TV

Caution
• Turn off all the equipment including the TV before connecting anything.

Connecting the aerial and VCR

• The connecting cables are not provided.
• For further details, refer to the manuals provided with the devices to be connected.
If connecting a VCR, follow A A A A →
B B B B → C C C C .
If not connecting a VCR, follow 1 1 1 1 .
To operate T-V LINK functions, a T-V
LINK compatible VCR must be connected to
the EXT-2 terminal on the TV. For details
about T-V LINK functions, see "T-V LINK
functions" on page 7.
• A video can be viewed from the VCR
without performing C. For details, refer
to your VCR instruction manual.
• To connect additional external devices,
please see "Connecting the external
devices" on page 32.
• When a decoder is connected to a T-V
LINK compatible VCR, set the
DECODER (EXT-2) function to ON. For
details, see "DECODER (EXT-2)" on
page 28. Otherwise, you will not be able
to view scrambled channels.
Rear Panel
Back of the TV
21-pin
SCART Cable
VCR
AV IN/OUT
Terminal
1 EXT-1 terminal (pages 3, 29, 32)
2 EXT-2 terminal (pages 3, 7, 29, 32)
3 EXT-3 terminal (pages 29, 32)
4 Aerial socket (page 3)
Aerial
75-ohm
Coaxial Cable
75-ohm
Coaxial
Cable
To Aerial
Input
To Aerial
Output
3