JVC AV-28F3SJ Instructions Manual
Hide thumbs
Also See for AV-28F3SJ:
- Service manual (23 pages) ,
- Instructions manual (18 pages) ,
- Instructions manual (17 pages)
Related Manuals for JVC AV-28F3SJ
Summary of Contents for JVC AV-28F3SJ
- Page 1 ENGLISH AV-28F3SJ COLOUR TELEVISION INSTRUCTIONS 50056683 ©2004 Victor Company of Japan, Limited 1004-MKH-VT-VT...
-
Page 2: Table Of Contents
Contents Safety Precautions 1. Power Source Safety Precautions ..........1 Warning ..............2 The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting Guidelines for safe operation ........ 2 for your convenience. Remote Control Buttons ......... -
Page 3: Warning
Warning Guidelines for safe operation DO NOT cut off the mains plug from this This equipment has been designed and manufactured to comply with international safety standards. equipment. However, as with any electrical appliance, care must be tak- If the plug fitted is not suitable for the power points in your en to ensure optimal results and operational safety. -
Page 4: Remote Control Buttons
Remote Control Buttons = Stand By / Power £ ™ £ 0 - 9 = Direct Program Yellow Button / Factory Settings in Picture Menu Blue Button Ó PICTURE = Picture Mode Change ) = Programme Up (Cursor Up) MENU = Menu Button ) = Cursor Right / Volume + £... -
Page 5: Control Panel Buttons
Control Panel Buttons Antenna Connections ENGLISH - 4 -... -
Page 6: Preparation
Preparation • Replace the battery cover. Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. “Use this apparatus in tropical and moderate climates.”... -
Page 7: T-V Link
• When recording a TV channel by using the TV’s output be- A “T-V LINK compatible VCR” means a JVC video cassette cause the VCR’s own tuner cannot properly receive that recorder with the T-V LINK logo, or with one of the following channel. -
Page 8: Operating With The Onset Buttons
This function does not happen if your TV’s main power Menu System is turned off. Set your TV’s main power to on (standby mode). Your TV has been designed with a menu system. Display “MENU” (main menu) and enter one of five menus (SOUND, Operating with the onset buttons PICTURE, FEATURE, INSTALL and PROGRAM). -
Page 9: Picture Menu
Setting Balance: Setting Contrast: You can change Contrast only when Picture Mode is select- • Using “ “ or “ ” button select Balance. ed MANUAL. • Press “ ” button to change balance rightward. • Using “ “ or “ ”... - Page 10 Hue adjust is functional only when NTSC 3.58/4.43 is applied • When the AUTO mode does not function correctly due to in AV mode. It does not appear when other colour systems poor WSS signal quality or when you want to change the used.
-
Page 11: Feature Menu
• You can choose the ZOOM mode by pressing the “ZOOM” Language: (RED) button when no menu appears on the screen. Menu Language can be selected by pressing “ ” or “ ” button • The ZOOM mode may be automatically changed by the on Language item. -
Page 12: Using The Decoder (Ext-2) Function
1. PROGRAMME will be the first selected item as you enter • In TV mode: PAL / SECAM the INSTALL menu. Pressing “ ” or “ ” button select the • In AV mode: AUTO / PAL / SECAM / NTSC 3.58 / NTSC 4.43 programme number where you want to the tuned channel 2. -
Page 13: Program (Programming) Menu
To change the programme number of a channel Program (Programming) Menu (INSERT): You can use the PROGRAM (Programming) menu to delete a channel, to change the programme number of a channel, to 1. Choose the channel you want to change the programme give a channel name to a channel, and to start the AUTO number. -
Page 14: To Display The Time
2. Press the VCR / DVD Control Button to control your VCR or DVD player. Note: • If your device is not made by JVC, these buttons cannot be used. • Even if your device is made by JVC, some of these buttons... -
Page 15: To Reveal “Concealed” Information
In Toptext mode the “ “ or “ ” commands will request • Press “ “ button again for the bottom half of the informa- the next or previous page respectively. If Toptext transmis- tion page to be displayed in double height text. sion is not available, in case of operation of these com- •... - Page 16 Connect the External Equipments Before connecting anything • Switch off all equipments including the TV. • Read the manuals provided with the equipments. To select an AV mode Pressing “AV” button on the remote control selects one of six AV modes (EXT-1, RGB, EXT-2, EXT-2S, EXT-3 or EXT-4) •...
-
Page 17: Ntsc Playback
NTSC Playback Specifications Connect a NTSC video recorder to a terminal. Then press “AV“ button to select the corresponding AV mode. TV BROADCASTING NTSC 3.58/4.43 system is detected automatically in AV PAL I mode. Copy Facility RECEIVING CHANNELS You can output the video and audio signals which inputs from VHF (BANDI/III) TV, EXT.1 (EXT-1) or EXT.3 (EXT-3) terminal to the video re- UHF (BAND U) - Page 18 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...