Sound Menu; Stereo / I • Ii; Bass; Treble - JVC AV-28T4SP Instructions Manual

SOUND menu

SOUND
STEREO/

BASS

TREBLE

BALANCE

HYPER SOUND

TV OK
D0019-EN
STEREO / I • II
When you are viewing a bilingual broadcast
programme, you can choose the sound from
Bilingual I (Sub I) or Bilingual II (Sub II).
When the stereo broadcasting is received
poorly, you can change from stereo to mono
sound so that you can hear the broadcast
more clearly and easily.
s: Stereo sound
v : mono sound
t : Bilingual I (sub I)
u : Bilingual II (sub II)
• The sound mode you can choose differs
depending on the TV programme.
• This function does not work in the EXT
modes.
BASS
You can adjust the low tone of the sound.
2 : weaker
3 : strong
TREBLE
You can adjust the high tone of the sound.
2 : weaker
3 : strong
BALANCE
You can adjust the volume balance between
the left and right speaker.
2 : turn the left speaker's volume level up.
3 : turn the right speaker's volume level up.
HYPER SOUND
OFF
You can enjoy sounds with a wider
ambience.
ON:
This function is turned on.
OFF:
This function is turned off. The menu
disappears.
• The HYPER SOUND function does not
work properly with mono sound.
• You can turn on or off the HYPER
SOUND function with a single press. For
details, see "HYPER SOUND function"
on page 13.
• The HYPER SOUND function works
only for the audio signal output from TV
channels. It cannot work for the audio
signal input from EXT sources.
• The HYPER SOUND function affects the
audio signal output from the EXT-1 and
EXT-2 terminals. If you want to output
the normal audio signal from the EXT
terminals, turn the HYPER SOUND
function off.
21