JVC InteriArt T-V Link AV-32H40SU Instructions Manual page 6

2 Press the a a button a a
The LANGUAGE menu appears.
3 Press the 5 5 and 6
5 5
choose ENGLISH. Then press the
a button a
a a
English is set for the on-screen display
description. The COUNTRY menu
appears as a sub-menu of the AUTO
PROGRAM function.
There are two COUNTRY menus.
Pressing the yellow button changes the
COUNTRY menu as follows:
4 Press the 5 5 and 6
5 5
choose the country where you are
now located
6 buttons to
6 6
6 buttons to
6 6
5 Press the blue button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears
and received TV channels are
automatically registered in the
Programme numbers (PR).
• To cancel the AUTO PROGRAM
function:
Press the b button.
After the TV channels have been
registered in the Programme
numbers (PR), the EDIT menu
appears
• You can proceed to edit the
Programme numbers (PR) using the
EDIT/MANUAL function. For details,
see "EDIT/MANUAL" on page 29.
• If you do not need to use the EDIT/
MANUAL function, go to the next
step.
If "ACI START/ACI SKIP" appears
in the AUTO PROGRAM menu:
You can use the ACI (Automatic Channel
Installation) function to decode the ACI
data and complete the registration of all
the TV channels in a short period of time.
For details of the ACI function and how to
use it, refer to "Using the ACI function"
on page 34.
If you don't want to use the ACI function,
press the 6 buttons to choose ACI
SKIP and then press a.
Setting up your TV
5