Setting Up Your Tv; Connecting The Aerial And Vcr - JVC InteriArt T-V Link AV-32H40SU Instructions Manual

Setting up your TV

Caution
• Turn off all the equipment including the TV before connecting anything.

Connecting the aerial and VCR

• The connecting cables are not provided.
• For further details, refer to the manuals provided with the devices to be connected.
If connecting a VCR, follow A A A A →
B B B B → C C C C .
If not connecting a VCR, follow 1 1 1 1 .
To operate T-V LINK functions, a T-V
LINK compatible VCR must be connected to
the EXT-2 terminal on the TV. For details
about T-V LINK functions, see "T-V LINK
FUNCTIONS" on page 6.
• A video can be viewed from the VCR
without performing C. For details, refer
to your VCR instruction manual.
• To connect additional external devices,
please see "Additional preparation" on
page 37.
• To connect speakers and amplifier, please
see "Connecting Speakers/Amplifier" on
page 38.
• When a decoder is connected to a T-V
LINK compatible VCR, set the
DECODER (EXT-2) function to ON. For
details, see "Using the DECODER (EXT-
2) function" on page 36. Otherwise, you
will not be able to view scrambled
channels.
Rear Panel
EXT-
1
Back of the TV
EXT-
EXT-
S
21-pin
SCART
Cable
VCR
AV IN/OUT
Terminal
1 Aerial socket (3)
2 EXT-1 terminal (3, 23, 37)
3 EXT-2 terminal (3, 6, 23, 37)
4 EXT-3 terminal (23, 37)
5 AUDIO OUT terminal (38)
Aerial
75-ohm
Coaxial
Cable
1
L
R
AUDIO OUT
2 3
EXT-
S
75-ohm
Coaxial
Cable
To Aerial
Input
To Aerial
Output
3