Description Of Each Menu - InFocus X17 Reference Manual

Description of each menu

FUNCTION
(default setting/
value)
Wall Color
(Off)
Aspect Ratio
(Auto)
Keystone
(0)
Position
(0)
Phase
(depends on the
selected input
signal)
H. Size
(0)
Digital Zoom
(1.0X)
Preset Mode
(PC source:
Brightest;
Video source:
Standard)
Reference
Mode
(Brightest)
Brightness
(50)
Contrast
(0)
Color
(0)
38 Operation
DESCRIPTION
(default setting/value)
Corrects the projected picture's color when the projection
surface is not white. See
details.
There are four options to set the image's aspect ratio
depending on your input signal source. See
aspect ratio" on page 26
Corrects any keystoning of the image. See
keystone" on page 25
Displays the position adjustment page. To move the projected
image, use the directional arrow keys. The values shown on the
lower position of the page change with every key press you
made until they reach their maximum or minimum.
Adjusts the clock phase to reduce image
distortion.
Adjusts the horizontal width of the image.
Magnifies or reduces the projected image. See
searching for details" on page 26
Pre-defined picture modes are provided so you can optimize
your projector image set-up to suit your program type. See
"Selecting a picture mode" on page 28
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See
mode" on page 29
Adjusts the brightness of the image. See
on page 29 for details.
Adjusts the degree of difference between dark and light in the
image. See "Adjusting Contrast" on page 29
Adjusts the color saturation level -- the amount of each color in
a video image. See
"Using Wall Color" on page 29
for details.
for details.
for details.
"Setting the User 1/User 2
for details.
"Adjusting Color" on page 30
for
"Selecting the
"Correcting
"Magnifying and
for details.
"Adjusting Brightness"
for details.
for details.