Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Safety and Regulatory Notice See the Intel Desktop Boards D845GRG and D845GBV Product Guide for all applicable regulatory compliance statements, product certification markings, and safety and electromagnetic compatibility (EMC) standards and regulations these desktop boards are compliant with.
Desktop Board Components Line USB 2.0 USB 2.0 Devices Devices HD LED Power LED 2-pin alternate Reset power/sleep LED connector No Connection OM13885 Intel Desktop Boards D845GRG and D845GBV Quick Reference...
CAUTION Failure to use an ATX12V power supply, or not connecting the additional power supply lead to the Desktop Board D845GRG or D845GBV may result in damage to the desktop board and/or power supply. For more information on the ATX12V power supply, refer to the Intel Desktop Boards D845GRG and D845GBV Product Guide on the Intel Express Installer CD-ROM.
For the latest information on processors supported by Desktop Boards D845GRG and D845GBV, refer to the Intel World Wide Web site at: http://support.intel.com/support/motherboards/desktop Memory Module Requirements The desktop boards supports system memory as defined below: • Up to two 184-pin Double Data Rate (DDR) 200/266 SDRAM Dual Inline Memory Modules (DIMMs) with gold-plated contacts •...
Secure the desktop board to the chassis standoffs using the screws. The Desktop Board D845GRG is secured to the chassis with six and Desktop Board D845GBV with eight screws. Refer to the board illustration on page 4 for the location of the mounting holes.
OM12078 The desktop boards have an integrated processor fan heat sink retention mechanism (RM). For instructions on how to install the processor fan heat sink, refer to the boxed processor manual or the Intel World Wide Web site at: http://support.intel.com/support/processors/pentium4/intnotes478.htm...
Installing an AGP Card ✏ NOTE The D845GRG and D845GBV boards are only compatible with 1.5 V AGP cards. The Desktop Boards D845GRG and D845GBV have an integrated AGP card retention mechanism (RM). Follow these instructions to install an AGP card: Place the AGP card in the AGP connector.
Observe the precautions in “Before You Begin” on page 3. Attach the cable end with the single connector (A) to the board. Attach the cable end with the two closely spaced connectors (B) to the drives. Intel Desktop Boards D845GRG and D845GBV Quick Reference...
The BIOS configuration jumper block determines the operating mode of the BIOS Setup Program and enables BIOS recovery in the event of a failed BIOS update (see the previous illustration for the location of the jumper block). Intel Desktop Boards D845GRG and D845GBV Quick Reference...
Page 12
(None) diskette in the event of a failed BIOS update.* *To update or recover the BIOS, see the instructions in the Intel Desktop Boards D845EPT2 and D845EBG2 Product Guide on the Intel Express Installer CD-ROM For a complete list of BIOS Setup settings, see: •...
Page 15
(ESD) +5 V +12 V (EMC) Intel D845GRG D845GBV (ITE) Intel D845GRG D845GBV...
Page 16
Line USB 2.0 USB 2.0 Devices Devices HD LED Power LED 2-pin alternate Reset power/sleep LED connector No Connection OM13885 Intel D845GRG D845GBV Ã...