Table of Contents
Advertisement
Color Match: Adjusts the color quality of the image to make it
Reset:
Invert:
Calibration: Defines Brightness for the scanner. Users are
Quality/Speed Mode:
Pixel/Inch/Cm:
Set Gamma: Adjusts the midtone of the image without losing
close to the original. This function uses default
parameters to adjust the image.
Resets the current scanning parameters to the
original parameters.
The invert command reverses the brightness and
the color in the image. For color images, each pixel
will be changed into its complementary color at the
command of Invert.
recommended to calibrate the light source if the
scanned image looks undesirable or comes out to
be too dark.
Users can select the mode to perform scanning
according to their own need. Select quality mode
scanning if your emphasis is on the quality of the
scanned image. Or, select speed mode scanning if
you want to speed up the scanning process.
Represents the different measuring systems to be
used in each scan.
details of the lightest and the darkest areas at the
same time.
4.-9
Advertisement
Table of Contents
