Icom IC-F43GT Instruction Manual page 33

D D Transmitting a Call Alert
Call Alert allows you to notify another user who may be away
from the transceiver that you want to talk.
qPush [MDC Call] to enter the MDC menu selection mode.
• Or push [MDC CallAlert] to enter the transceiver alias selection
mode. In this case, skip steps w and e.
wSelect "CALALERT" using [CH Up], [CH Down], [MDC Up]
or [MDC Down].
ePush [MDC Call] again to enter the transceiver alias selec-
tion mode.
rSelect the desired alias using [CH Up], [CH Down], [MDC
Up] or [MDC Down].
tPush [PTT] to transmit the call alert to the selected station.
• "CA CALL" is displayed.
yRelease [PTT].
• "CA OK" is displayed if the targeted station received the alert.
• "CA FAIL" is displayed if the targeted station does not send an
acknowledgement.
uAfter a specified time period has passed, the transceiver
will return to receive.
MDC 1200 OPERATION
D D Transmitting a Radio Check Call
Radio check call allows you to determine whether another
transceiver is turned on, within range and on channel without
requiring any action from the targeted station user.
qPush [MDC Call] to enter the MDC menu selection mode.
wSelect "RADIOCHK" using [CH Up], [CH Down], [MDC Up]
or [MDC Down].
ePush [MDC Call] again to enter the transceiver alias selec-
tion mode.
rSelect the desired alias using [CH Up], [CH Down], [MDC
Up] or [MDC Down].
tPush [PTT] to transmit the radio check call to the selected
station.
• "RDO CHK" is displayed.
yRelease [PTT].
• "CHK ACK" is displayed if the targeted station is turned ON, on
channel and within range.
• "CHK FAIL" is displayed if the targeted station does not send an
acknowledgement.
uAfter a specified time period has passed, the transceiver
will return to receive.
5
29