Note; Removing The Rails; To Unhook The Rails; To Hook Rails Back Into Position - Gaggenau BO 210/211 Instruction Manual

1
2
3
a

Note

The duration of the catalysis cannot be changed.
You can view the remaining duration of the catalysis
and the switch-off time by calling up the timer
menu.
If you want to stop the catalytic cleaning:
Switch off the temperature knob.
If you have delayed the switch-off time, three
dashes instead of the temperature are shown on the
display. After the start of the catalysis the
temperature appears on the display.

Removing the Rails

The rails can be removed for cleaning.

To Unhook the Rails

1 Lift the rail at the front in an upwards direction.
2 Unhook the rail at the front.
3 Then pull the whole rail forward and take it out.
Clean the rails using either washing-up liquid and a
sponge or a brush.

To Hook Rails Back into Position

1 First insert the rail in the rear socket.
2 Push the rail back slightly and then hook it into
the front socket.
The rails fit both the left and right sides. Recess (a)
must always be at the bottom.
29