Advertisement
3 Connecting to a Windows NT 3.51 Server
Windows for
Requirements
Workgroups
• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
• IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01.
• Driver Name: IBMMPC.DOS Size: 59KB Date: 5/22/95
• Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/
• Netware client for DOS and MS-Windows.
Device Configuration
• Interrupt
• I/O Address
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
2 Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer
3 After the machine boots, verify that the adapter finished testing and that
4 Click on "F3" to exit, and then press "CTRL+ALT+DEL."
5 After windows loads, open the "NETWORK" folder, and double-click the
6 Select "Networks" and choose "Install Microsoft Windows Network" and
7 Click on "Drivers" then on "Add Adapter."
8 With "Unlisted or Updated Network Adapter", click on "OK."
9 Insert disk 2 of 6 (Auto LANStreamer PCI Driver Diskette), set the path
SPX, and NWLink NetBIOS transfer protocols.
adapter card into a PCI slot.
PCI Diagnostic Disk) and power on the machine.
the adapter is "OK."
"NETWORK SETUP" icon.
click on "OK."
to "A:\" and hit enter. (If you have an HP preloaded HDD, set the path to
D:\LANDRV\LNSTRM\DISK2\")
3 Connecting to a Windows NT 3.51 Server
Windows for Workgroups
9 (2)
FCC0-h
Advertisement
