Removal And Replacement Procedures; Preliminary Replacement Requirements; Tools Required; Service Considerations - HP ProBook 4540s Maintenance And Service Manual

4

Removal and replacement procedures

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Phillips P0 and P1 screwdrivers
●
Torx T8 screwdriver

Service considerations

The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION:
Use care when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.
50 Chapter 4 Removal and replacement procedures
Using excessive force during disassembly and reassembly can damage plastic parts.