Inserting Battery - Fujitsu Siemens Computers POCKET LOOX 700 Series Getting Started Manual

Hide thumbs Also See for POCKET LOOX 700 Series:
Table of Contents

Advertisement

Inserting battery

!
Please adhere to the order of the following steps! Otherwise data loss may occur!
Press the release (1) in the direction of the arrow and hold it pressed.
Lift the cover (2) and pull the cover off the Pocket PC.
Push the slide (3) in the direction of the arrow.
5
Lay the battery in the battery compartment (4 +5). Watch the contact connections.
Push the slide (6) in the direction of the arrow.
Position the cover on its slot in the direction of the arrow (7).
Carefully flap the cover down (8) until you feel it latch in place.
The battery is not charged at the time of delivery. Therefore, charge the battery for
i
12 hours before the first mobile use (see "Connecting the power adapter" section).
When you replace the battery, an internal backup battery prevents your data from being
lost. This backup battery can buffer the data for up to 30 minutes. The buffer time is
dependent on the charging level of the backup battery.
A26391-K151-Z100-1-5E19, edition 3
2
1
4
6
Pocket LOOX 700 Series
3
7
8
English - 5

Advertisement

Table of Contents
loading

Table of Contents