Summary of Contents for Fujitsu Siemens Computers Pocket LOOX 700 Series
Page 1
Handheld English EasyGuide Pocket LOOX 700 Series...
Page 2
Are there ..any technical problems or other questions which you would like to be clarified? Please contact: ● our Hotline/Help Desk (see the included Help Desk list or go to: www.fujitsu-siemens.com/helpdesk) ● your sales partner ● your sales outlet Further information can be found in the "Safety"...
Page 4
This manual was produced by cognitas. Gesellschaft für Technik-Dokumentation mbH – www.cognitas.de Published by Fujitsu Siemens Computers GmbH AG 08/05 Edition 1 Order no.: A26391-K167-Z120-1-7619...
Page 5
Introduction Important notes Pocket LOOX 700 Series Operating the Pocket PC Configuring the Pocket PC Connecting and networking the Pocket-PC Operating Manual Troubleshooting and tips Technical data Index August 2005 edition...
Contents Your Pocket LOOX..........................1 Notational conventions ......................... 2 Software overview ..........................3 Important notes ..........................5 Safety notes............................5 Underway with the Pocket PC ......................6 Transporting Pocket PC ....................... 6 Using the Pocket PC ..........................6 Cleaning Pocket PC ..........................7 Disposal and recycling..........................
Page 8
Contents Configuring the Pocket PC.......................39 Optimising energy management ......................39 General information on energy management ................39 Using energy-saving functions....................40 Adjusting menus ..........................41 Password protection..........................41 Configuring hardware buttons ......................42 FSC KeyLock: preventing switch-on via application buttons ............42 Assigning chosen functions to the hardware buttons..............42 Connecting and networking the Pocket PC with other devices ...........43 Wireless data transfer with infrared interface..................43 Wireless connection via Wireless LAN ....................43...
Your Pocket LOOX..is equipped with the Office applications Microsoft Word, Excel and Outlook. In Outlook you cannot only receive and send mails, but also manage your appointments and be reminded of your tasks. You can access names, e-mail addresses and telephone numbers while you are away from your home or office.
Notational conventions Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to texts marked with this symbol. Failure to observe this warning may endanger your life, destroy the system, or lead to loss of data.
Software overview Software overview The following table provides an overview of the most important programs which are already installed on your Pocket PC and where you can find information on using these programs. Software Used for Operating information Word Mobile For word processing Help file on Pocket PC Excel Mobile...
Page 12
Software overview Software Used for Operating information Problems when scrolling in the Internet Help file on the Pocket-PC and FSC Panning Explorer Mobile? user manual "Pocket LOOX Software Suite" on the FSC Panning quickly brings window Microsoft Getting Started CD contents into view.
Important notes This chapter contains safety notes and important information you must observe when using your Pocket PC. This Pocket PC complies with the relevant safety regulations for data processing equipment. If you have questions as to whether you can set up the cradle and the Pocket PC in the intended environment, please contact your sales point or our hotline/help desk.
Important notes Underway with the Pocket PC Observe the following information when you travel with your Pocket PC. Transporting Pocket PC ● Switch the Pocket PC off. ● Disconnect the cables from the Pocket PC. ● If the device needs to be shipped, use the original packaging or other suitable packaging to protect it from damage caused by mishandling.
Microsoft Getting Started CD. Liability Fujitsu Siemens Computers GmbH cannot be held responsible for radio or television faults arising from unauthorised changes made to this device. Fujitsu Siemens Computers is, furthermore, not responsible for replacing and / or exchanging connector cables and devices which have not been specified by Fujitsu Siemens Computers GmbH.
(1999/5/EC), EMC Directive (89/336/EEC), and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. CE compliance of this computer is valid only if powered with an Fujitsu Siemens Computers-provided CE marked AC Adapter. Compliance with these directives implies conformity to the following European Norms (in parentheses are the equivalent international standards and regulations): ●...
Operating the Pocket PC In this section you will find a description of the operating controls of your Pocket-PC and how you operate the Pocket-PC. Please take note of the information in the "Important notes" chapter. Overview of operating elements and connections Wireless indicator Infrared interface 1 2 3 4...
Page 18
Operating the Pocket PC Battery compartment cover Slot for SD/MMC cards Release Slot for CompactFlash cards 10 = Record button Headphones port 11 = ActiveSync port Camera flash (optional) 12 = Opening for soft reset (warm boot) Camera lens (optional) 13 = Microphone Mirror for self-portrait (optional) A26391-K167-Z120-1-7619, edition 1...
Page 19
Operating the Pocket PC Connection for Pocket PC Slot for additional battery Power-on indicator for additional battery ActiveSync port A26391-K167-Z120-1-7619, edition 1...
Operating the Pocket PC Initial start-up Please follow the sequence of these steps! Before the first data synchronisation between your Pocket PC and your PC/notebook, you must install the program ActiveSync on your PC/notebook. In just a few steps your Pocket PC is ready to use the first time: ●...
Page 21
Operating the Pocket PC ► Lay the battery in the battery compartment (4 +5). Watch the contact connections. ► Push the slide (6) in the direction of the arrow. ► Position the cover on its slot in the direction of the arrow (7). ►...
Operating the Pocket PC Connecting PSC11R-050 mains adapter Please take note of the safety information in the "Important notes" chapter. You can connect the PSC11R-050 mains adapter to the Pocket PC (for instructions on how to connect the mains adapter to the cradle, please read the section "Using the cradle"). ►...
Page 23
Operating the Pocket PC ► Connect the ActiveSync cable (1) to the ActiveSync port on the Pocket PC. ► Connect the mains adapter cable (2) to the DC socket of the ActiveSync cable. ► Connect the PSC11R-050 mains adapter (3) to an electrical outlet. The installed battery will now be charged.
Operating the Pocket PC Installing ActiveSync on your PC/notebook The data synchronisation helps you always keep your data on your Pocket PC and your PC/notebook up to date when you work alternately with your PC/notebook and your Pocket PC. The ActiveSync cable and the ActiveSync software are provided for data synchronisation. ActiveSync is already installed on your Pocket PC.
Operating the Pocket PC Starting Pocket PC the first time ► Press the Suspend/Resume button (1) to switch on the Pocket PC. ► Pull out the pen (2) in the direction of the arrow. Adjusting touchscreen The display of your Pocket PC is a touchscreen. To ensure that the touchscreen of your Pocket PC reacts correctly when touched with the stylus, you will be asked to align the touchscreen after the initial start-up.
Operating the Pocket PC First data synchronisation between the Pocket PC and the PC/notebook After you have specified the desired and required settings for synchronisation in the ActiveSync Setup Wizard, the first synchronisation starts automatically. Switching Pocket PC off and on Switch the Pocket PC on or off with the Suspend/Resume button.
Operating the Pocket PC Switching on and off with soft reset (warm boot) After certain applications or the installation of new programs, it may be necessary to restart the Pocket PC with the soft reset. Unsaved data is lost. Shut down all programs before you restart the Pocket-PC. ►...
Page 28
Operating the Pocket PC ► Take the stylus and screw it apart (1). ► Simultaneously press the tip (2) into the soft reset opening and the Suspend/Resume button (2). A26391-K167-Z120-1-7619, edition 1...
Operating the Pocket PC Resetting Pocket PC to delivered state When you reset your Pocket-PC to the delivered state, you lose all data (documents, additionally installed programs, personal settings) that you have not saved elsewhere. Save your data at regular intervals (memory card, FSC Backup). If you have set a password with FSC Password and marked it as permanent, the password remains intact.
Operating the Pocket PC Using standard operating elements Using the pen ► Briefly touch the desired element on the display with the stylus to trigger an action. ► To activate popup menus, also touch the desired element with the stylus, however leave the stylus on the element for a moment: the popup menu appears and you can select an element by touching it.
Operating the Pocket PC Using the application buttons CONNECTMOBILITY-E2C button Today button Contacts button Calendar button With the application buttons and the appropriate preset (see chapter "Configuring the Pocket PC"), you can open your preferred programs and applications directly from suspend mode or from within an application.
Operating the Pocket PC Operating camera Depending on the model, your Pocket PC is equipped with a camera. The camera has three photographic functions: ● Photo ● Film ● Photo with background picture You can start the camera in two different ways: ►...
Operating the Pocket PC Inserting and removing expansion cards Two slots allow the operation of different expansion cards in your Pocket PC. Possible expansion cards include memory cards (Type I or II CompactFlash cards and SD/MMC cards), GPS cards, GSM/GPRS CompactFlash cards and LAN cards. Only use expansion cards suitable for your Pocket PC.
Page 34
Operating the Pocket PC The memory card can protrude by one to several millimetres (depending on the type of card used). Keep the placeholder in a safe place. When you remove the memory card again, you should refit the placeholder. This prevents foreign matter from getting into the slot. ►...
Operating the Pocket PC Inserting and removing CompactFlash cards A slot is suitable for a type I or II CompactFlash card. ► Pull the placeholder (1) for the CompactFlash card out of the slot. ► Carefully push the CompactFlash card (2) with the connection contacts first into the slot until it is felt to engage.
The USB Host cable is available as an accessory under the name "Sync Cable USB client/host". USB devices from Fujitsu Siemens Computers, such as the MEMORYBIRD or the STORAGEBIRD, can be connected immediately and will be detected as new components without problems.
Operating the Pocket PC On the road with the Pocket PC Your Pocket PC is equipped with a powerful battery. When you're on the road your Pocket PC is supplied with power by the integrated battery. At your home or office you can recharge the battery in the cradle.
Page 38
Operating the Pocket PC Connecting PSC11R-050 mains adapter to Pocket PC with ActiveSync cable ► Connect the ActiveSync cable (1) to the ActiveSync port on the Pocket PC. ► Connect the mains adapter cable (2) to the DC socket of the ActiveSync cable. ►...
Page 39
Operating the Pocket PC Connecting PSC11R-050 mains adapter to Pocket PC with adapter ► Connect the adapter (1) to the ActiveSync port of the Pocket PC. ► Connect the mains adapter cable (2) to the adapter. ► Connect the PSC11R-050 mains adapter (3) to an electrical outlet. The installed battery will now be charged.
Page 40
Operating the Pocket PC Charging battery with cradle There are two ways to connect the PSC11R-050 mains adapter to the cradle: ● You can use the ActiveSync cable.. ● You can use the adapter. Connecting PSC11R-050 mains adapter to cradle with ActiveSync cable ►...
Operating the Pocket PC Connecting PSC11R-050 mains adapter to cradle with adapter ► Connect the adapter (1) to the ActiveSync port of the cradle. ► Connect the mains adapter cable (2) to the adapter. ► Connect the PSC11R-050 mains adapter (3) to an electrical outlet. ►...
Operating the Pocket PC Synchronising data with ActiveSync To also have the current version of the data you have processed on the road on your Pocket PC available on your PC/notebook, you must copy these data to your PC/notebook. This procedure is conveniently enabled with data synchronisation: In the ActiveSync program you can specify that the respective latest version of a file be detected and then automatically updated on the respective data carrier - regardless of whether it is the Pocket PC...
Operating the Pocket PC Synchronising data with new PC/notebook If you want to synchronise data with a new PC/notebook, you must first install ActiveSync on this new PC/notebook and establish a new ActiveSync partnership (see the corresponding explanation in the section "Initial start-up").
Operating the Pocket PC Using cradle for data synchronisation Before the first data synchronisation between the Pocket PC and the PC/notebook, you must install the program ActiveSync on your PC/notebook (see "Initial start-up"). ► Switch your PC or notebook on. ►...
Operating the Pocket PC Charging additional battery in cradle The cradle is equipped with a slot in which you can charge an additional battery (additional batteries ae available as an accessory). ► Connect the cradle to an electrical outlet with the mains adapter (see "Charging battery with cradle").
Configuring the Pocket PC You can already choose from a large number of programs when you use the Pocket PC for the first time. In addition, proven default settings are defined for the menu structure, energy management, memory management and security functions. But, of course, you can add and remove programs and configure the Pocket PC as desired.
Configuring the Pocket PC Using energy-saving functions You can save energy in several ways to optimally utilise the battery operating time: – Switch the Pocket PC into the Suspend mode when you are not using it. – Reduce the processor speed. –...
Configuring the Pocket PC Adjusting menus Frequently used programs appear in the Start menu. You can adjust the Start menu to meet your needs. ► Touch the Menus symbol under Start - Settings - Private . A list of programs/applications appears. To remove programs from the Start menu, click in the checkbox of the program.
Configuring the Pocket PC Configuring hardware buttons FSC KeyLock: preventing switch-on via application buttons By default, your Pocket LOOX starts up if the Suspend button and an application button are pressed. In the program FSC KeyLock you can specify that the Pocket PC only starts if the Suspend button is pressed.
Connecting and networking the Pocket PC with other devices The Pocket PC offers a wide range of ways to exchange data with other devices or to work in a network. You have already become familiar with data synchronisation via ActiveSync and an ActiveSync cable in the "Synchronising data with ActiveSync"...
Connecting and networking the Pocket PC with other devices Wireless communication with Bluetooth With your Pocket PC with an integrated Bluetooth module you can communicate wirelessly with other Bluetooth devices, e.g. with another Pocket PC, a notebook or a mobile phone. In the following sections, you will find out how to put Bluetooth into operation.
Troubleshooting and tips If a fault occurs in your Pocket PC, try to eliminate it with the measures described in this chapter. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed.
Troubleshooting and tips The Pocket PC does not start after switch on If the Pocket PC does not start after switch on, this may be due to one of the following: The battery is dead ► Charge the battery. ► Connect the PSC11R-050 mains adapter to the cradle with the Pocket PC.
Troubleshooting and tips The Suspend/Resume button does not respond properly You have pressed and held the Suspend/Resume button too long to switch the Pocket PC on or off. ► Briefly press the Suspend/Resume button until the Pocket PC switches on or off. No sound or minimal volume Check whether the volume is set correctly.
Technical data Pocket PC Processor: Intel PXA272 with 520 MHz Main memory: 128 Mbyte RAM 64 MB ROM Electrical data Regulations complied with: CE, FCC Part 15 Class B, EN60950, UL, cUL Protection class: Maximum power draw: 10 W (Pocket PC on with battery charging) Display Transflective TFT display:...
Technical data Dimensions Height/width/depth: 122 mm x 72 mm x 15.2 mm Weight: approx. 170 g Battery (Li-Ion) 1640 mAh Rated capacity: Max. 4 hours Charging time (when not in operation): up to 12 hours Operating time: up to 350 hours in stand-by mode PSC11R-050 mains adapter Primary: ●...
Index Data transfer Bluetooth 44 infrared 43 ActiveSync partnership, establishing 16 Wireless LAN 43 ActiveSync port 10 Data, technical 49 ActiveSync, installing 16 Date, not correct 45 Application button Date/Time incorrect 45 Calendar button 9 Display 9 CONNECTMOBILITY-E2C button 9 cleaning 7 Contacts button 9 difficult to read 45...
Page 60
Index MMC card PSC11R-050 power adapter inserting 25 connecting 14 removing 25 technical data 19, 50 MultiMedia Card see MMC card with ActiveSync cable on Pocket PC 30, 32 with adapter on cradle 33 with adapter on Pocket PC 31 Navigation key 9 using 22 No sound 47...
Page 61
Index Time not correct 45 Volume Time, daylight savings 45 controlling 40 Tips 45 minimal 47 Today button 9 Today screen 17 Touchscreen, aligning 17 Warm boot 19 Transport 6 Wireless data transfer 43, 44 Troubleshooting 45 Wireless LAN 43 Using camera 24 A26391-K167-Z120-1-7619, edition 1...