Advertisement
Quick Links
Follow the steps for care and cleaning.
Remove the water container with the handle
Fig. 4
and turn upside down. Unscrew the valve
in the center of the base. Fill container by
holding container under a source of running
cold water until the container is filled to the
desired level. Do not overfill. Screw the valve
cap onto the water container and return the
container to the upright position. Place the
water container onto the base and make cer-
tain it is seated properly in the cavity.
1. Make sure the "I"/"O" (ON/OFF) switch is
in the "O" (OFF) position.
2. Make sure all hose connections are
secure and tight.
3. Make sure the telescopic pole is fully
extended and the hose is not twisted
or kinked.
4. Plug the steamer cord into a normal
electrical outlet.
5. Turn the "I"/"O" (ON/OFF) switch to the
"I" (ON) position.
6. The switch will light to indicate when
power is "I" (ON)
7. Steam will be produced from the
nozzle in about one minute.
8. To turn the steamer off, turn the "I"/"O"
(ON/OFF) switch to the "O" (OFF) position.
Steam nozzle
360˚ rotating
hanger
Pant clips
Removable
5ft. cool-touch
insulated hose
with storage clip
Fig. 5
Cool-touch
handle with
easy-grip
raised ribs
Telescoping pole
hangs garments
and nozzle and
collapses for
storage
Removable, easy-
to-fill and easy-
to-clean 2.5-liter
water tank with
integrated carry
handle
Advertisement
Related Manuals for Conair GS28TKC
Summary of Contents for Conair GS28TKC
- Page 1 Follow the steps for care and cleaning. 1. Make sure the "I"/"O" (ON/OFF) switch is in the "O" (OFF) position. 2. Make sure all hose connections are Steam nozzle Cool-touch Remove the water container with the handle handle with secure and tight. 360˚...
- Page 2 ULTIMATE Conair will repair or replace, at our option, your appliance free of charge for 12 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service centre below together with your sales slip and $7.50 for...
- Page 3 13. While emitting steam, this appliance may cause burns if it is used too close to the skin, scalp or eyes, or if it is used incorrectly. To reduce the risk of contact with hot water discharging from steam vents, test appliance When using electrical appliances, espe- before each use by holding it away from body.
- Page 4 During operation, the steamer hose may the steamer. For best performance from the housing. gurgle. This is a normal result of condensa- Conair Ultimate Fabric Steamer, decalcify ® tion collecting inside the hose. Simply lift the 4. Remove the steamer hose.
- Page 5 pole firmly (Fig. 1). It is now in place to Be sure the unit is off ("O"). Insert angled end rotate 360˚. Hang your garment and steam of hose into steamer housing and twist clock- away wrinkles. Turn as you wish. wise to securely lock hose onto housing.
- Page 6 Grasp the handle of the steam nozzle with the steam jets facing away from you. Begin CAUSE - Steamer not plugged in at the bottom of the fabric to allow the SOLUTION - Plug into electrical outlet If you steam in a low position, condensation steam to rise inside and outside, removing will collect inside the hose.
Need help?
Do you have a question about the GS28TKC and is the answer not in the manual?
Questions and answers