Conair CGS18A Manual
  1. Manuals
  2. Brands
  3. Conair Manuals
  4. Steam Cleaner
  5. CGS18A
  6. Manual

Conair CGS18A Manual

Professional garment steamer
Hide thumbs

Advertisement

Table of Contents

PROFESSIONAL GARMENT STEAMER
Model CGS18A

Advertisement

Table of Contents
loading

Related Manuals for Conair CGS18A

Summary of Contents for Conair CGS18A

  • Page 1 PROFESSIONAL GARMENT STEAMER Model CGS18A...

  • Page 2: Important Safety Instructions

    Do not place on any heat-sensitive surface and always allow to cool before storing away. • Do not use any attachments other than those supplied by Conair Australia Pty Ltd. • Use this appliance only for its intended use as described in this...
  • Page 3 • This appliance is not intended for commercial use. • Never drop or insert any object into an opening or hose. • Do not use if unit has been dropped or damaged. • Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
  • Page 4 • Only use clean cold water for filling this appliance. In hard water areas, we recommend the use of distilled water. • Always keep the hose and nozzle elevated above the water container. • Before unit is turned on, the hose must be extended, and then place it in the hook.

  • Page 5: Getting To Know Your Steamer

    GETTING TO KNOW YOUR STEAMER 30% more steam* with a unique nano-silver ceramic coated nozzle 360˚ rotating hanger Up to 1½ hours continuous steam spins for convenient steaming access Cool touch handle with easy-grip control Duo pant clip system, specially designed to Adjustable telescopic easily steam trousers &...

  • Page 6: Steamer Assembly

    STEAMER ASSEMBLY The garment steamer comes in several parts: 1. Telescopic pole 2. Extendable telescopic pole 3. One metal rod with pant clip system 4. Two grooved plastic connectors (one is attached to the base of the steamer and the other is attached to the metal rod with pant clip system) 5.
  • Page 7 Assembling the Telescopic Pole, Pant Clip System and 360° Rotatable Hanger Step.1 Unscrew existing grooved connector from the base of the steamer (Fig.A) and place aside. (Fig.A) Step.2 Insert telescopic pole (1.) (with open hole facing down) into receptacle in base of the steamer (Fig.B). Slide the pole into the base of the steamer and twist into place, and then push the pole down as far as it can go, until it clicks into place.
  • Page 8 Step.4 Take the metal rod with pant clip system (3.) and unscrew the grooved connector. Place grooved connector aside. (Fig.D) (Fig.D) Step.5 Place the metal rod with pant clip system over the top of the pole on the garment steamer. NB - The pant clips on the metal rod should be at the back of the garment steamer.
  • Page 9 Step.7 Insert the round plastic connector/storage hook (5.) onto the top of the pole on the garment steamer. (Fig.G) NB – The round hook should be facing the front of the garment steamer. Push the round plastic connector down the pole until it cannot be pushed down any further.
  • Page 10 Step.10 Place the 360˚ rotatable hanger with pant clip system (6.) over the top of the pole. NB – The pant clips on the hanger should be at the back of the garment steamer. Hold the pole and then push the hanger down into place. (Fig.K) (Fig.K) The telescopic pole, hanger and duo pant clip system should now...
  • Page 11 Attaching the Steamer Hose To attach the steamer hose, insert the bottom of the steamer hose (9.) into the base of the garment steamer. Twist clockwise to secure in place. 1. Insert 2. Turn 3. Lock Removing the Steamer Hose Ensure that the garment steamer has cooled down.
  • Page 12 USING THE 360° ROTATABLE HANGER This garment steamer includes a 360°rotatable hanger. To use the hanger, simply hang your garment over the hanger and turn as you wish. Each time you move the hanger around, it will automatically click and secure itself in place, for fast and easy use. USING THE PANT CLIP SYSTEM The duo pant clip system provides best tension for steaming trousers and long garments.

  • Page 13: Connecting The Attachments

    CONNECTING THE ATTACHMENTS Attachments should only be connected and removed from the nozzle when the steamer is switched off and the nozzle has cooled down. Once the steamer is switched off it should only take approx 15 to 30 seconds for the nozzle to cool. This garment steamer includes two interchangeable attachments: 2-in-1 lint and bristle brush attachment for removing fluff and hair from garments, home furnishings and...
  • Page 14 To use the press attachment, simply open the press attachment by pushing the clip on the bottom of the nozzle away from you. The press attachment should now be open. Place the nozzle and press attachment at the top of the garment to be steamed, ensuring not to place the press attachment too far over the garment.
  • Page 15 DUST MITES Dust mites flourish in warm, humid environments and need humidity of more than 50% year round to survive, making most coastal areas of Australia and New Zealand the perfect breeding ground. Millions of dust mites exist in homes attached to fibres in carpet, bedding, pillows, sofas, rugs, throws, cushions, curtains, drapes and children’s soft toys.

  • Page 16: Filling The Water Container

    OPERATING INSTRUCTIONS BEFORE FILLING THE WATER CONTAINER Turn the water container upside down and inspect to make sure the valve and spring assembly are functioning. Place the container in the reservoir and check that it is seated securely. If the container has been stored with water inside, it may be necessary to remove the water and clean the container.

  • Page 17: Operating The Steamer

    OPERATING THE STEAMER 1. Ensure that the steamer is assembled correctly and that the hose is connected securely to the base of the steamer. 2. Ensure that the on/off ‘I/O’ switch is set to the ‘O’ position. 3. Plug the steamer into a suitable power outlet. 4.
  • Page 18 Depending on the type of garment/fabric to be steamed, there are several ways of steaming: 1a) Grasp the nozzle with the steam nozzle facing away from you. 1b) Begin at the bottom of the garment and hold the ends of the garment taut.
  • Page 19 NB - During operation the steamer hose may gurgle. This is a normal result of condensation collecting inside the hose. Simply lift the steamer nozzle and handle into an upright position until the hose is extended to full height, allowing the condensation to flow back into the base of the steamer.

  • Page 20: Cleaning, Storing And Maintenance

    CLEANING, STORING AND MAINTENANCE 1. Turn the product off by flicking the on/off ‘I/O’ switch to the ‘O’ off position. Unplug from the power outlet. 2. Wait for the steamer to cool completely for at least 30 minutes. 3. Coil power cord loosely around the appliance. 4.
  • Page 21 frequency also depends on the hardness of the water used. To decalcify, fill the water tank with a solution of 1/3 white vinegar and 2/3 water and replace the water container into its cavity in the base of the steamer. Place the nozzle head over a sink and switch the steamer on, to the ‘I’...

  • Page 22: Limited One-Year Warranty

    LIMITED ONE YEAR WARRANTY Conair Australia Pty Ltd. will repair or replace (at our option) your appliance free of charge for twelve months from the date of purchase if the appliance is defective of workmanship or materials. This warranty is an additional benefit and does not affect your legal rights.

Table of Contents