Table of Contents
Advertisement
ENGLISH
Making Detailed Settings (Manual Setup)
Setting items
Amp Assign
Configuration : Select MAIN ZONE channel configuration.
Change
the
power
•
5.1ch / 7.1ch / 9.1ch / 11.1ch
amp assignment to suit
Extra Channel : Select the channels to be used from among surround
the
speaker
system
back speakers (SB), front height speakers (FH), front wide speakers (FW).
configuration.
When setting "Configuration" to "7.1ch"
n
•
When setting "Configuration" to "9.1ch"
n
•
Assign Mode : Select power amp usage method.
•
NORMAL : This is the usual configuration.
•
+Z2 : Assign a power amp to ZONE2 audio.
•
+Z2+Z3 : Assign a power amp to ZONE2 and ZONE3 audio.
•
ALL Z2 : Assign all power amps to ZONE2 audio.
•
ALL Z2+Z3 : Assign all power amps to ZONE2 and ZONE3 audio.
•
FREE : Freely assign power amps to the desired channels.
Front : Select front speaker connection method.
•
NORMAL : This is the usual configuration.
•
Bi-WIRING : Bi-wire the front speakers.
•
Bi-AMP : Bi-amp the front speakers.
•
2CH BW : Bi-wire another front speaker for 2 channel play mode.
•
2CH BA : Bi-amp another front speaker for 2 channel play mode.
Speaker Configuration
Front : Set the front speaker size.
Select speaker configuration
•
Large : Use of a large speaker that can adequately playback low
and size (bass reproduction
frequencies.
capability).
•
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
NOTE
Select "Large" or "Small"
•
When "Subwoofer" is set to "No", "Front" can automatically set to
not
according
to
the
"Large".
physical size of the speaker
•
When "Front" is set to "Small", "Center", "Surround", "Surround
but according to the low
Back", "Front Height" and "Front Wide" can not be set to "Large".
frequency
reproduction
Center : Set the presence and size of the center speaker.
capabilities based on the
•
Large : Use of a large speaker that can adequately playback low
frequency set at "Crossover
frequencies.
Frequency" (vpage 42).
•
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
•
None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
0
Main remote control unit
operation buttons
Setting contents
SB / FH / FW
SB/FH / SB/FW / FH/FW
:Displaying the menu
Cancel the menu
Setting items
Speaker Configuration
Subwoofer : Set the presence of a subwoofer.
(Continued)
•
Yes : Use a subwoofer.
•
No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" can automatically set
to "Yes".
Surround : Set the presence and size of the surround speakers.
•
Large : Use of a large speaker that can adequately playback low
frequencies.
•
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
•
None : Select when the surround speakers are not connected.
•
When "Surround" is set to "Large", "Surround Back", "Front Height"
and "Front Wide" can be set to "Large".
•
When "Surround" is set to "None", "Surround Back", "Front Height"
and "Front Wide" can automatically set to "None".
Surround Back : Set the presence, size and number of surround back
speakers.
•
Large : Use of a large speaker that can adequately playback low
frequencies.
•
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
•
None : Select when the surround back speakers are not connected.
•
2spkrs : Use two surround back speakers.
•
1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
•
When "Configuration" is set to "5.1ch" in the "Amp Assign" settings
or when "SB" is not selected using "Extra Channel", no settings can be
made for "Surround Back".
•
Even when the Surround Back Speaker setting is other than "None",
sound may not be emitted from the surround back speaker, depending
on the playback source. In this case, "Surround Parameters" – "Surround
Back" setting other than "OFF" (vpage 82).
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Setting contents
:Return to previous menu
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
