Connecting Devices Not Equipped With Hdmi Connectors - Denon AVR-1610 Owner's Manual

Connections
The AVR-1610 allows connection of inputs from up to 3 HDMI
devices and output to 1 TV.
DVD
Player
Blu-ray
Disc Player
SAT/CABLE
Tuner
Monitor
(TV)
• Use a cable on which the HDMI logo is indicated (a certified HDMI
product) for connection to the HDMI connector. Normal playback
may not be possible when using a cable other than one on which the
HDMI logo is indicated (a non-HDMI-certified product).
• When the AVR-1610 is connected to other devices with HDMI
cables, also connect the AVR-1610 and TV using an HDMI cable.
• When a device supporting Deep Color signal transfer is connected,
use a cable compatible with HDMI ver.1.3a.
• Video signals are not output if the input video signals do not match
the monitor's resolution. In this case, switch the Blu-ray Disc player /
DVD player's resolution to a resolution with which the monitor is
compatible.
NOTE
• If the menu "HDMI Audio Out" setting (vpage 27) is set to
"Amp", the sound may be interrupted when the monitor's power is
turned off.
• The audio signal from the HDMI output connector (sampling
frequency, number of channels, etc.) may be limited by the HDMI
audio specifications of the connected device regarding permissible
inputs.
n
Connecting to a device equipped with a DVI-D
connector
When an HDMI/DVI conversion cable (sold separately) is used, the
HDMI video signals are converted to DVI signals, allowing connection
to a device equipped with a DVI-D connector.
NOTE
• No sound is output when connected to a device equipped with a
DVI-D connector. Also make the audio connections.
• Signals cannot be output to DVI-D devices that do not support
HDCP.
• Depending on the combination of devices, the video signals may not
be output.
n
Settings related to HDMI connections
Set as necessary. For details, see the respective reference pages.
Input connector assignment (vpage 31)
Set this when changing the input sources of the different connectors.
HDMI Setup (vpage 27)
Make these settings related to HDMI input/output signals.
• Auto Lip Sync
• HDMI Audio Out
• HDMI Control
• Standby Source
• Power Off Control
NOTE
The audio signals output from the HDMI connectors are only the
HDMI input signals.
Connecting Devices not
Connecting devices
Equipped with HDMI connectors
Monitor (TV)
• Select the terminal to use and connect the device.
• For video connections, see "Converting input video signals for output
(Video Conversion Function)" (vpage 9).
For instructions on HDMI connections, see "Connecting Devices
Equipped with HDMI connectors" on page 12.
Monitor (TV)
The component video connectors may be indicated differently on your
monitor. For details, see the monitor's operating instructions.
ENGLISH
3