Automatic Power Off; Using Power Lock - Radio Shack 22-813 Owner's Manual

o o
WARNING
Do not change the
function dial's setting
with the meter's leads
connected to the circuit
under test.
10
To cancel hold, press
HOLD
function dial to another setting. Hold
disappears.
A P
UTOMATIC OWER
Your meter conserves power by
automatically turning off about 30 minutes
after the last time you changed the setting
(even if you are making measurements),
The meter beeps as it turns itself off.
To turn the meter on after it automatically
turns off, press any button or select another
o
function.
U P L
SING OWER OCK
Follow these steps to set the meter so that it
does not turn off automatically.
1. Rotate the function dial to
off the meter.
2. Hold down and
HOLD SELECT
same time, then turn on the meter.
appears.
3. Release and
HOLD SELECT
PWR
disappears and appears.
Lock
To reset the meter so that it automatically
turns itself off, turn off the meter then turn it
PWR
on. disappears.
Lock
again or set the
O
FF
to turn
OFF
at the
PLoc
PLoc
.