Pairing - Plantronics Calisto User Manual

Action
Disconnected from
the headset
Connected to the headset
Radio link active
Pairing mode
Pairing Headset with USB Bluetooth
NOTE The headset and USB Bluetooth adapter are paired to each
other at the factory. However, if you have purchased a USB Bluetooth
adapter separately, or if you wish to use a replacement headset with
your existing adapter, the units must be paired.
Insert the USB Bluetooth adapter in the USB port of your computer.
1. To put the headset into pairing mode, you must first power the
headset off. You will hear 4 descending beeps when the headset
powers off.
2. Once headset is off, hold down call control button for 4-6 seconds.
3. Release the button when the indicator lights on the headset begin to
flash red then blue.
Bluetooth USB Adapter Indicator Lights
Indicator Lights
Flashes purple
Solid blue
Flashes blue
Flashes red and blue
Adapter
2 sec.
7