System Specifications - JBL PRX600 series User Manual

System Spec
System Type:
Maximum SPL Output:
Frequency Range (-10 dB):
Full Range
Monitor (vertical orientation)
Monitor (monitor orientation)
Frequency Response (±3 dB):
Full Range
Monitor (vertical orientation)
Monitor (monitor orientation)
Input Connectors:
Input Impedance:
Signal indicators:
EQ:
Dynamic Control (Input):
Crossover Modes:
Crossover Frequency:
Amplifier
Design:
Power Rating:
Speaker
LF Driver:
HF Driver:
Coverage Pattern:
Directivity Index (DI):
Directivity Factor (Q):
Enclosure:
Suspension/ Mounting:
Transport:
Finish:
Grille:
Input Connectors:
Dimensions (H x W x D):
Net Weight:
Gross Weight:
SYSTEM SPECIFICATIONS | PRX612M
Self powered 12", two-way, bass-reflex
134 dB (Full Range) peak 133 dB (Monitor) peak
50 Hz -19.5 kHz
60 Hz -19.5 kHz
51 Hz -19.5 kHz
60 Hz -17.5 kHz
90 Hz -18 kHz
61 Hz -18.5 kHz
Balanced XLR / 1/4 inch combo jack with XLR loop through
20K Ohms (balanced), 10K Ohms (unbalanced)
Limit : Red LED indicates limiter active condition
Signal: Green LED indicates signal present
Presets for use in Main and Monitor position
dbx Type IV™ limiter circuit
DSP controlled. LF: 48 dB/Oct. filter slope High & Low Pass
HF: 36 dB/Oct High Pass
2 kHz
Crown® Class D
1000 W (2 x 500)
1 x JBL 262F-1 380 mm (12 in) Differential Drive® dual voice-coil
and magnetic gap, neodymium woofer
1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm,
neodymium compression driver
90º x 50º nominal
9.8 dB
9.6
Asymmetrical, 18 mm, plywood
Dual 36 mm pole socket, 8 x M10 Suspension Points and 1 x M10
Pull-Back Point
Integrated handle with backing cup
Obsidian DuraFlex™ finish
Powder coated, Obsidian, 16 gauge perforated steel with
acoustically transparent black cloth backing.
Balanced XLR / 1/4 inch combo jack with XLR loop through
592 mm x 353 mm x 340 mm (23.3 in x 13.9 in x 13.4 in)
15.6 kg (34.5 lb)
19.2 kg (42.5 lb)
13