Advertisement
Getting Started
The Digital Skipping Rope comes with the rope and handle separated. Please assemble the rope in accordance with the
following diagram.
The Digital Skipping Rope uses 2 x AAA batteries for power. Please follow these steps to install the batteries:
1.
Open the battery compartment cap at the end of the handle by turning the cap counter-clockwise.
2.
Remove the battery compartment cap and install two new AAA batteries with the '+' polarity facing outwards as
indicated by the polarity symbols ( + and - ) marked on the unit.
3.
Replace the cap by turning clockwise until it snaps into place. The rope will beep twice
Note: If the sound weakens, distorts, or the display dims, please replace the batteries.
Setting Weight
In order to calculate calorie consumption, the rope requires your weight. Follow these steps to enter your weight:
1. Repeatedly press MODE until you are NOT within the COUNTDOWN TIMER mode.
2. Press and hold down SET until you hear "Enter your weight". Repeatedly press (or hold) UP and DOWN to set
your weight between 25kg and 150 Kg.
3. Press SET once to confirm and return to the normal display mode.
Setting Countdown Timer
You can set up your target workout time by following these steps:
1.
Repeatedly press MODE until you hear "Countdown Timer"
2. Press and hold down SET until you hear "Set Timer". Repeatedly press (or hold) UP and/or DOWN to set the
target workout time, up to 99 minutes.
3. Press SET once to confirm and return to normal display mode.
Advertisement
