Table of Contents
Advertisement
User Manual
SmartAX MT800 ADSL CPE
gteq: any source IP address that is numerically greater
than or equal to the specified address.
eq: any source IP address that is numerically equal to
the specified address.
neq: any source IP address that is not equal to the
specified address.
range: any source IP address that is within the specified
range, inclusive.
out of range: any source IP address that is outside the
specified range.
self: the IP address of the MT800 interface on which this
rule takes effect.
Dest IP Address: IP address criteria for the destination
computer(s) (i.e., the IP address of the computer to which
the packet is being sent). In addition to the options
described for the Src IP Address field, the following option
is available:
bcast: specifies that the rule will be invoked for any
packets sent to the broadcast address for the receiving
interface. When you select this option, you do not need
to specify the address, so the address fields are
dimmed.
Protocol: IP protocol criteria that must be met for rule to be
invoked. You can specify that packets must contain the
selected protocol (eq), that they must not contain the
specified protocol (neq), or that the rule can be invoked
Chapter 4 Web-based Management
4-32
Advertisement
Table of Contents
