Table of Contents
Advertisement
HOW TO START UP THE CONDITIONER
(see control panel on the opposite page)
AIR-CONDITIONING
The Min. speed warning
light comes on.
Move the cursor to maxi-
mum cold position. The air-
cooling signal lamp comes
on. (When the room
tempeture has reached the
desired level, move the slid-
ing thermostat control
gradually to the min. posi-
tion: the unit switches off
and the conditioning sig-
nal lamp start to flash).
Press the "Air-conditioning"
key again to increase fan
speed. The Max. speed
warning light comes on.
Plug the appliance into the mains.
The signal lamp will come on
Press the ON/OFF key.
The function signal lamps flash and the
out.
Press the key for the function required:
AIR-COOL. KEY = Air-conditioning
VENT. KEY
= Ventilation
AUTO. KEY
= Automatic climatization
VENTILATION
The Min. speed signal lamp
comes on.
Press the "ventilation" key
again to obtain Max. speed.
The Max. speed warning
light comes on.
Select either the "Programmed" or "Non-programmed" mode
(see pg. 26)
The appliance comes on
If not, refer to pg. 30
To switch off the appliance,
press the Power push-button.
.
signal lamp goes
The appliance automati-
cally selects the ventilation
or the air-conditioning func-
tion depending on the room
temperature.
One of the signal lamps will
come on, depending on the
function selected by the
microcomputer.
AUTOMATIC
27
Hide quick links:
Advertisement
Table of Contents
