Husqvarna GTH2550XP Owner's Manual page 9

CHASSIS
BRACKET
GAUGE
WHEEL
DOUBLE
LOOP
RETAINER
SPRING
USE PLIERS FOR
RETAINER SPRINGS
LOOP
DOWN
C HECKLIST
!
BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC-
TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE
BEST PERFORMANCE AND SATISFACTION FROM THIS
QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST:
All assembly instructions have been completed.
!
No remaining loose parts in carton.
!
Battery is properly prepared and charged. (Minimum 1
!
hour at 6 amps).
Seat is adjusted comfortably and tightened securely.
!
All tires are properly inflated. (For shipping purposes,
!
the tires were overinflated at the factory).
Be sure mower deck is properly leveled side-to-side/
!
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling).
Check mower and drive belts. Be sure they are routed
!
properly around pulleys and inside all belt keepers.
Check wiring. See that all connections are still secure
!
and wires are properly clamped.
Before driving tractor, be sure freewheel control is in
!
drive position.
ASSEMBLY
DOUBLE LOOP
RETAINER SPRING
(Inward pointing deck pins)
ANTI-SWAY
BAR
IDLER
PULLEY
FIG. 6
SUSPENSION ARMS
FRONT
MOWER
BRACKET
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
Engine oil is at proper level.
!
Fuel tank is filled with fresh, clean, regular unleaded
!
gasoline.
Become familiar with all controls - their location and
!
function. Operate them before you start the engine.
Be sure brake system is in safe operating condition.
!
It is important to purge the transmission before operating
!
your tractor for the first time. Follow proper starting and
transmission purging instructions (See "TO START
ENGINE" and "PURGE TRANSMISSION" in the Opera-
tion section of this manual).
9
FRONT
ELECTRIC
SUSPENSION
CLUTCH
BRACKETS
PULLEY
FLANGED PIN
FRONT
PLATE
ASSEMBLY
SINGLE LOOP
RETAINER
SPRINGS
DEFLECTOR
SHIELD