Chain Dialing; Voice Message Notification - Uniden D1760 Series User Manual

To...
cancel a page
answer a page
end an intercom call

Chain Dialing

If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Enter the code number (up to 20 digits) into the phonebook just like
a regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
3. Press
MEnu/sElEcT
the phonebook.

Voice Message Notification

If you subscribe to a voice mail service, your phone displays the voice
mail icon (
Frequency-Shift Keying (FSK) and Stutter Dial Tone (SDT) notification,
which you can turn on and off through Global Setup/Voice Mail Tone.
After you listen to your messages, the message icon turns off. If it doesn't,
you can reset it: With the phone in standby, open the menu and select
Global Setup; select VMWI Reset, then select Yes.
Setting Up Voice Mail Access
If you have voice mail access through your service provider, you can
program that access number into your phone and then just press one key
to dial -
MEssagE/MuTE
you can either enter that manually after you have accessed the voice mail
or you can program that into your phone, too.
1. Press
MEssagE/MuTE
system prompts you to do that now.
2. Enter the provider's voice mail access number. Press
the number.
3. The screen displays DONE!
Press...
.
End
inTErcoM/clEar
. Both handsets return to standby.
End
to send the code. If you change your mind, just close
) when you have a new message. This feature supports
. You will set up an access code to your account, and
. If no voice mail access number has been set up, the
or .
Talk/Flash
to set
MEnu/sElEcT
13