Troubleshooting - DeLonghi ESAM 5500 Instructions Manual

TROUBLESHOOTING

Below is a list of some of possible malfunctions.
If the problem cannot be resolved as described, contact customer services.
PROBLEM
The coffee is not hot
The coffee is not creamy
enough
The coffee is delivered too
slowly or a drop at a time.
The coffee is delivered too fast.
POSSIBLE CAUSE
• The cups have not been
preheated.
• The infuser has cooled
down because 2/3 minutes
have elapsed since the last
coffee was made.
• The coffee is ground too
coarsely.
• Wrong type of coffee
• The coffee is ground too
finely.
• The coffee is ground too
coarsely.
41
REMEDY
• Warm the cups by rinsing
them with hot water.
• Before making coffee, heat
the infuser by pressing the
button.
• Turn the grinding adjust-
ment knob one click anti-
clockwise towards "1" while
the coffee mill is in opera-
tion (fig. 8). Continue one
click at a time until coffee
delivery is satisfactory. The
effect is only visible after
delivering two coffees.
• Use a type of coffee for
espresso coffee makers.
• Turn the grinding adjust-
ment knob one click clock-
wise towards "7" while the
coffee mill is in operation
(fig. 8). Continue one click
at a time until coffee deli-
very is satisfactory.
effect is only visible after
delivering two coffees.
• Turn the grinding adjust-
ment knob one click anti-
clockwise towards "1" while
the coffee mill is in opera-
tion (fig. 8). Avoid turning
the grinding adjustment
knob excessively otherwise
when you select two cups,
the coffee may be delivered
a drop at a time.
GB
The