Usb/Sd Operation; Phono To Usb/Sd - Crosley CR6007A Instruction Manual

SD-Card Operation
1 Slide THE FUNCTION Switch to SD/USB mode.
2 Switch the unit ON by turning the VOLUME knob
to the on Position. If no Card has been detected,
"Read" "No Card" will show on the Display.
3 Turn the VOLUME control to the mid-range
position.
4 Insert SD-Card into the card slot. "READ" is
displayed as the system scans the contents of
SD card.
5 Track no. 1 of root folder (Folder 1) will be
displayed after reading SD card contents. Press
PLAY/PAUSE/
6 Press the FORWARD SKIP/
SKIP / once or repeatedly until the desired
track number appears on the display. Playback
will begin automatically.
7 Press STOP /
8. To pause the music, press PLAY/PAUSE /
press it again to resume play.
USB Operation
1. Slide the FUNCTION Switch to SD/USB mode.
2. Switch the unit ON by turning the VOLUME knob
to the on Position.
3. Turn the VOLUME control to the mid-range
position.
4. In stop mode, Press STOP /
approximately 2 seconds. The display will switch
from "SD" to "USB".
If no USB has been detected, " NO USB" will show
on the Display.
USB
5. Plug-in USB mass storage device. READ is
displayed as the system scans the contents of
USB device.
USB
6. Track no. 1 of root folder (Folder 1) will be displayed
after reading USB device contents.
Basic Operation
to start music playback.
/ BACKWARD
to stop playback.
and hold for
Press PLAY/PAUSE/
7. Press the FORWARD SKIP /
SKIP/ once or repeatedly until the desired
track number appears on the display. Playback
will begin automatically.
8. Press STOP /
9. To pause the music, press PLAY/PAUSE /
press it again to resume play.
Remarks:
1. USB connector does not support connection with
USB extension cable is not designed for
communication with computer directly.
2. All USB Flash Drives and SD Cards may not be
compatible with this unit.
IMPORTANT:
Do not disconnect the USB device SD card during
USB/SD card mode, as this may damage the
external device or its files. Please power off first
or press another Mode before safely
, disconnecting the USB device /SD card.

Phono to USB/SD

This unit allows you to convert your records into
MP3 format onto either USB Flash Drive or SD
Card. To convert your records, follow the steps
below.
1. Slide the FUNCTION button to PHONO mode.
2. Start playback of the record at the point you want
to start recording. (See Turntable Operation on
Page 7 for more information on playing your
records).
3. Press REC/ERASE /
" REC " will show on the display.
4. The media that you are recording to (either USB
or SD) will begin flashing on the display once
recording begins.
5. Press STOP /
to start music playback.
USB
MP3
/ BACKWARD
to stop playback.
to start recording.
to stop the recording process.
,
8