TOTALINE Signature CPV210 Owner's Manual
TOTALINE Signature CPV210 Owner's Manual

TOTALINE Signature CPV210 Owner's Manual

Commercial non-programmable thermostat

Advertisement

Quick Links

OWNER'S
MANUAL
Part Number P374-2100
GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Thermostat Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Heat or Cool Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Thermostat Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . 4
Thermostat Inner Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 5
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7,8
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Two-Stage Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Electric Heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Dry Contact Switch/External Control . . . . . . . . . . . . . . . . . . . . . 7
Remote Temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Outdoor Temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Manufacturer reserves the right to
discontinue, or change at any time,
specifications or designs without notice
and without incurring obligations.
CONTENTS
REPLACEMENT COMPONENTS DIVISION
CARRIER CORPORATION 1/98
LITERATURE NUMBER P374-7SO
PRINTED IN CHINA
CPV210
Commercial
Non-Programmable
Thermostat
Page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Signature CPV210 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TOTALINE Signature CPV210

  • Page 1: Table Of Contents

    OWNER’S CPV210 Commercial MANUAL Non-Programmable Thermostat Part Number P374-2100 CONTENTS Page GENERAL ......... . . 2 CONFIGURATION .
  • Page 2: General

    IMPORTANT: Read entire instructions before configuring thermostat. GENERAL The commercial, non-programmable thermostats are wall-mounted, low- voltage thermostats which maintain room temperature by controlling the op- eration of an HVAC (heating, cooling and ventilation) system. Separate heat- ing and cooling set points and auto-changeover capability allow flexibility. Dry contacts are provided for optional wiring to field-supplied external out- put device to control thermostat to occupied and unoccupied set points for energy savings.
  • Page 3: Configuration

    CONFIGURATION Thermostat Display — The thermostat display is located in the center of the thermostat. See Fig. 1. The following information can be displayed on the screen: • mode (OFF, HEAT, COOL, or AUTO) • fan setting (FAN ON or blank) •...
  • Page 4: Heat Or Cool Indicator

    Heat or Cool Indicator — A Heat or Cool indicator is located on the bot- tom left cover of the thermostat. See Fig. 2. The light will be red if the ther- mostat is in Heating mode. The light will be green if the thermostat is in Cooling mode.
  • Page 5: Thermostat Inner Panel Buttons

    again. Thirty minutes of override time will be added for each time the Over- rided button is pressed up to a maximum of 4 hours. After the 4-hour limit has been reached, press the Override button again to cancel override mode. While in Override mode, the Override icon and the Occupied 1 icon will be displayed on the thermostat.
  • Page 6 MODE BUTTON OPERATION — The Mode button selects the operating mode of the thermostat. If OFF is selected, the thermostat will not enter heat- ing or cooling mode. If HEAT is selected, the thermostat will only enter Heat- ing mode (if the room temperature is below the heating set point). If COOL is selected, the thermostat will only enter Cooling mode (if the room tem- perature is above the cooling set point).
  • Page 7: Operation

    RESET FILTER BUTTON — The Reset Filter button is used by the service person to reset the Service Filter icon display. If the Reset Filter button is pressed during normal thermostat operation, the number of hours of fan operation is displayed. KEYPAD LOCK —...
  • Page 8: Remote Temperature Sensor

    SOFT START — When multiple thermostats are controlled by the same ex- ternal device, a Soft Start option can be used to stagger the turn on times of the HVAC equipment. This feature may cause a delay in operation after en- tering or leaving Unoccupied mode.
  • Page 12 Your Assurance of Quality ALL Totaline products are backed with a one-year warranty by Carrier Corporation, the world’s largest manufacturer of air conditioning, heating, and refrigeration products. Manufacturer reserves the right to REPLACEMENT COMPONENTS DIVISION discontinue, or change at any time, CARRIER CORPORATION 1/98 specifications or designs without notice...

Table of Contents