Specifications - Roland CAMM-3 PNC-3100 User Manual

Specifications

XY table size
Max. cutting area
Software resolution
Mechanical resolution
Feed rate
Spindle motor
Revolution speed
Display function
Interface
Buffer size
Instruction system
Control keys
Source
External dimensions
Weight
Operation temperature
Operation humidity
Accessories
• Interface Specification
[ Parallel ]
Standard In compliance with the specification of Centronics
Input signal STROBE(1BIT), DATA(8BIT)
Output signal BUSY(1BIT), ACK(1BIT)
I/O signal lebel TTL level
Transmissinon method Asynchronous
[ Serial ]
Standard RS-232C specification
Transmissinon method Asynchronous, duplex data transmission
Transmissinon speed 4800, 9600 (adjustable by DIP switch)
Parity check Odd, Even, None (adjustable by DIP switch)
Data bits 7 or 8 bits (adjustable by DIP switch)
Stop bits 1 or 2 bits (adjustable by DIP switch)
560 mm x 170 mm (22-1/16" x 6-11/16")
250 mm(X) x 150 mm(Y) x 150 mm(Z) (9-13/16"(X) x 5-7/8"(Y) x 5-7/8"(Z))
0.00125 mm/step (micro-step control)
X, Y-axis : Max. 60 mm/sec. (2-3/8"/sec.)
180W (AC commutator motor)
3000—8000 rpm (variable manually or via instruction)
X, Y and Z all-axis display function (0.01 mm unit), Spindle RPM (100 rpm unit)
Parallel (in compliance with the specification of Centronics)
Serial (under RS-232C standard)
CAMM-GLI (mode1, mode2)
Z0, Z1, Z2, HOME, ENTER, PAUSE ON, OFF, SPINDLE TEST ON/OFF
SENSOR ON/OFF, REPLOT, BUFFER CLEAR, VIEW
, , , , ,
2.4 A / 117 V
Main unit
Controller
Switch panel : 226 mm(W) x 48 mm(H) x 122 mm(D)
Main unit : 52 kg (114.6 lb.)
35 %—80 % (no condensation)
ø6 collet chuck, collet cap (these are installed on the unit), power cord
spanners : 3, hexagonal wrenches : 2, T nuts : 2, user's manual
39
PNC-3100
0.01 mm/step (0.00039")
Z-axis : Max. 30 mm/sec. (1-3/16"/sec.)
1Mbyte
, JOG HANDLE, JOG, SPINDLE CONTROL
1.4 A / 220—230 V
: 560 mm(W) x 605 mm(H) x 540 m(D)
(22-1/16"(W) x 23-7/8"(H) x 21-5/16"(D))
: 124 mm(W) x 221 mm(H) x 392 mm(D)
(4-15/16"(W) x 8-3/4"(H) x 15-7/16"(D))
(8-15/16"(W) x 1-15/16"(H) x 4-13/16"(D))
Controller : 9 kg (19.8 lb.) Switch panel : 1.1 kg (2.4 lb.)
5—40 C (41—104 F)
Appendix
1.3 A / 240 V