Table of Contents
Advertisement
Installation Instructions
Installing the oven
When installing into combustible materi-
1
al, NIN 2005, chapter 4.2.2 and the fire
protection guidelines and their provi-
sions set by the Association of Swiss
Fire Insurance Companies must be
strictly observed.
1.
Insert the oven into the recess so that
the front is flush.
Make sure that the cable does not be-
come caught when sliding into place.
2.
Secure the oven each side with a mini-
mum of 2 screws (Detail A).
Electrical connection/cable
The electrical connection must be carried
out by a licensed installer.
A type H05VV-F cable or a higher value must
be used as the power supply lead.
The installation must be carried out using a
cable with a plug or, for a domestic installa-
tion, a separator with a contact opening of at
least 3mm is required which also separates
all poles of the appliance from the mains in
accordance with NIN 2000.
For a direct connection a cable length of at
least 120 cm is required.
1.
Connect terminal as shown in the con-
nection diagram.
Connection diagram 400V
Phase definitions:
L1, L2 (or R, S)
2.
Secure the cord grip.
In case of repair the appliance must
1
be switched off from the mains.
electrolux 29
Advertisement
Table of Contents
