Electrolux EWT126218W User Manual page 6

6 electrolux
SELECTING THE TEMPERATURE
Press the "Temperature"
peatedly to increase or decrease the tem-
perature (see "Programmes table"). The
symbol means a cold wash.
SELECTING THE SPIN SPEED
Turn the spin speed selector on the desired
position.
The maximum spin speeds are :
for Cottons, Eco : 1200 rpm, for Synthetics,
Lingerie, Wool/Handwash, Easy iron : 900
rpm, for Delicates, Mini programme, Cur-
tains, Blanket : 700 rpm.
At the end of the programme, if you have
selected "Rinse hold"
plus" , you then need to select a "Spin"
or "Drain" programme to finish the cy-
cle and empty the water.
Night silence plus : this cycle eliminates
all spin speed phases and ends with rinse
hold. This cycle is very quite and can be
used during the night.
SELECTING OPTIONS
You must select the different options after
selecting the programme and before press-
ing the "Start/Pause"
"Programmes table"). Press the desired
button(s) : the corresponding lights come
on. If pressed again, the lights go out. If one
of the options is not compatible with the se-
lected programme, the "Start/Pause"
pushbutton flashes red.
"PREWASH" OPTION (PRÉLAVAGE)
The appliance runs a prewash at 30°C
max.
"DAILY" OPTION (QUOTIDIEN)
This option allows to run a wash cycle of
lightly soiled laundry at reduced time.
"SUPER QUICK" OPTION (EXTRA
COURT)
The washing time will be reduced depend-
ing on the programme selected.
"RINSE PLUS" OPTION
The washing machine will add one or more
rinses during the cycle. This option is rec-
ommended for people with sensitive skin
and in soft water areas.
pushbutton re-
or "Night silence
pushbutton (see
Temporary : Press the "Rinse plus"
pushbutton. The option is only active for the
selected programme.
Permanent : Hold down the "Temperature"
and "Option" pushbuttons for a few sec-
onds. The option is permanently activated,
even if the appliance is switched off. To de-
activate it, repeat the process.
"DELAY START"
This option allows you to delay the start of a
wash programme by 3, 6 or 9 hours by
pressing the "Delay start"
You can change or cancel the delayed start
time at any time before you press the
"Start/Pause" pushbutton by pressing
the "Delay start"
(when all indicators are off, the wash pro-
gramme will start immediately).
If you have already pressed the "Start/
Pause" pushbutton and you want to
change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delay start and start the cy-
cle immediately, press "Start/Pause"
and then "Delay start"
Pause" to start the cycle.
• To change the timer delay period, you
must go through the "Stop" position
and reprogramme your cycle.
The lid will be locked during the delayed
start time. If you need to open it, you must
first pause the appliance by pressing the
"Start/Pause" pushbutton. After closing
the lid again, press the "Start/Pause"
pushbutton.
START OF THE PROGRAMME
Press the "Start/Pause"
start the cycle. The corresponding light will
come on green.
It is normal for the programme selector to
remain stationary during the cycle. The light
corresponding to the current cycle is illumi-
nated.
+ : Prewash + Wash
+ : Rinses + Spin
: End of cycle
The drain pump can operate for a short
time when the appliance fills water.
pushbutton.
pushbutton again
. Press "Start/
pushbutton to