Door Reversibility; Inner Door Reversal - AEG Electrolux ER6427T Installation And Instruction Manual

Door reversibility

The appliance must be unplugged before performing
the following operations.
To reverse the opening direction of the door, proceed
as follows:
1. dismantle the bottom hinge (5);
2. dismantle the door (4);
3. unscrew pin (2) from hinge (1) and replace on the
opposite side;
4. unscrew insert (6) and replace on the opposite side;
5. refit the door and bottom hinge;
6. unscrew the handle (3). Refit it on the opposite side
after having pierced the plugs with a punch. Cover
the holes left open with the plugs contained in the
documentation pack.

Inner door reversal

1. Using a screwdriver release bracket (1) by pressing
on the internal spring (Fig.) and withdraw it from its
seat together with the door;
2. remove plug (2) and fit it in the hole left open on the
opposite side;
3. turn the door through 180°, remove the bracket (1)
and refit it on the opposite side.
4. Refit the door and insert the top pin and bottom
bracket (1), pushing it into place.
To ensure correct storage of food, the door is fitted
with a simple spring device which holds it in the open
position until it is properly closed.
180
2
P R 1 4 0
50
1