Using The Automatic Warm-Up Function; Locking/Unlocking The Control Panel - Electrolux EHD6685P Installation And Operating Instructions Manual

Ceramic glass induction hob
Table of Contents

Advertisement

Using the automatic warm-up function

Step
Control panel
1.
Setting the level
2.
Place to one side for a moment
3.
touch
4.
touch in order to set the desired cooking setting
All cooking zones are equipped with an automatic
warm-up function. The automatic warm-up function
sets the cooking zone to the highest setting for a
certain period of time and then automatically switch-
es back to the cooking setting that was originally set.
3
If during the automatic warm up
heat setting is selected, e.g. from
automatic warm up is adjusted.
3
If there is still residual heat on the cooking
h
zone (display
not performed.
The length of time that the automatic warm up func-
tion operates depends on the heat setting selected.
Heat setting
v
1
2
3
4
5
6
7
8
9

Locking/unlocking the control panel

The control panel, with the exception of the "On/Off"
sensor field, can be locked at any time in order to
prevent the settings being changed e.g. by wiping
over the panel with a cloth.
Control panel
Switch on
Touch
Switch off
Touch
3
When you switch the appliance off, the locking
function is automatically switched off.
8
Ç / p
a
a higher
Á
to
), the automatic warm up is
Length of the automatic warm up [min:sec]
Ã
, the
Display
l
(for 5 seconds)
previously set heat setting
Display
Ç
p
/
Ç
p
/
a
Æ
¿
u
until
/
a
after 3 seconds
0:10
0:10
0:10
3:10
5:50
10:10
2:00
2:30
2:50
---

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents