Table of Contents
Advertisement
52
What to do if ...
Problem
F11 appears in the clock
display
F2 appears in the clock dis-
play
A fault code that is not list-
ed above appears in the
clock display
If you are unable to remedy the problem by following the above suggestions,
please contact your local Service Force Centre.
1
Warning! Repairs to the appliance are only to be carried out by qualified service engi-
neers. Considerable danger to the user may result from improper repairs.
3
If the appliance has been operated incorrectly, the engineer's visit will be chargeable,
even during the warranty period.
3
Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the oven door during (or
just after) baking or roasting may cause the glass to steam up.
Possible cause
The meat probe has short
circuited or the meat probe's
plug is not firmly in position in
the socket
Door not closed properly or door
lock faulty
Electronic fault
Remedy
Insert the meat probe plug into
the socket on the side wall of the
oven as far as it will go
Close door properly;
Switch the appliance off and on
again via the house fuse or the
safety switch in the fuse box.
If it is displayed again, please
contact the Customer Care De-
partment
Switch the appliance off and on
again via the building's fuse or
the safety switch in the fuse box.
If it is displayed again, please
contact the Customer Care De-
partment
Advertisement
Table of Contents
