Table of Contents
Advertisement
26
Using the Oven
3
Heat+Hold
The Heat+Hold function keeps your prepared dish warm for 30 minutes, after the baking
or roasting process is completed.
This is helpful, for example, if your guests are late.
Pre-condition for Heat+Hold:
• Set temperature is above 80°C
Switching on Heat+Hold
1. Set clock functions Duration and/or End .
2. Press the Selection button repeatedly until the symbol Keep warm
play.
3. Press the
4. As soon as the oven function is completed, a signal sounds and Heat+Hold starts.
The oven function set runs at 80°C for 30 minutes.
As soon as the 30 minutes with Heat+Hold has elapsed, the oven switches itself off.
3
Irrespective of an oven function being set, Heat+Hold remains active. You can
change between the oven functions.
Cleaning Reminder for pyrolytic cleaning
The Cleaning Reminder detects when pyrolytic cleaning is required and alerts the user to
this fact through the following display.
When the oven function has been switched off, the symbol Pyroluxe menue
for approx. 10 seconds.
By pressing
This flashing is repeated after longer baking/roasting sessions, until pyrolytic cleaning is
performed.
This function is switched on in the factory settings.
You can switch the Cleaning Reminder off and on again:
Switching Cleaning Reminder on or off
1. If necessary, switch on the appliance using the On/Off button.
2. Press the Selection button until the symbol for
Pyroluxe menue
button. "00:30:" appears in the display.
or
at the same time, the Cleaning Reminder can be reset.
flashes.
appears in the dis-
flashes
Advertisement
Table of Contents
