Deleting All Transactions; Deleting All Enrolled Employees; Initializing To Factory Defaults; Cutoff Time - Acroprint BioTouch User Manual

Deleting All Transactions

This function is rarely if ever used. Use with caution as you will lose all
transaction data on the clock. To remove all transaction from the clock:
1. Select 'Menu', Data Man, 'Delete all Glog' then press 'OK' when clock
shows 'Delete?' or press 'ESC' to go back.
2. When finished, press 'ESC' repeatedly to exit the menus or simply allow
the menus to time out.

Deleting All Enrolled Employees

This function is rarely if ever used. Use with caution as you will lose all
employees on the clock. To remove all enrolled employees:
1. Select Menu, Data Man, 'Clear all Enroll' then press 'OK' when clock
shows 'Continue?' or press 'ESC' to go back.
2. When finished, press 'ESC' repeatedly to exit the menus or simply allow
the menus to time out.

Initializing to Factory Defaults

This function is only used when you want to clear all information from the clock
and return all settings to their factory defaults. Use with caution as you will lose
all employees and transactions on the clock. To reinitialize the clock:
1. Select 'Menu', Setup, InitSys, and then press 'OK'.
2. When finished, press 'ESC' repeatedly to exit the menus or simply allow
the menus to time out.

Cutoff Time

A normal day by default begins at exactly 12:00 AM. Some companies, however,
may have employees who work shifts that end at 12AM or even into the next day.
Also, there may be shifts that begin at 12AM or earlier and end the next day.
The Cutoff time is used to 'move' such employees workday change time
backward or forward from 12AM so their hours are credited to the proper workday.
10