Advertisement
Quick Links
ATRx
Secure PunchIn™
BIOMETRIC FINGERPRINT TECHNOLOGY
INSTALLATION GUIDE
Thank you for purchasing ATRx Secure PunchIn. This installation
guide will help you learn how to connect the fingerprint reader,
enable biometrics in the software and enroll employee fingerprints
in the system.
Before You Start:
1. Ensure your computer meets the minimum
system requirements. See the product box
or visit the Acroprint website at
www.acroprint.com.
2. Verify package contents:
Attendance Rx™ software
ATRx Secure PunchIn™ fingerprint reader (FIU)
Installation guide
Software Installation:
Install Attendance Rx software by inserting the software CD into the
CD-ROM Drive. Follow and complete the Setup Wizard which will ask
you to input your Pay Period information, Shift and Lunch rules and a
new password. At completion of the Setup Wizard enter at least one
employee and then close the administrator screen.
NOTE: Leave the CD in the CD-ROM drive until the hardware
has been installed.
Connect ATRx Secure PunchIn
fingerprint reader to Windows Based PC:
1. Plug the fingerprint reader cable into an available
USB port on the PC. The location of the USB port
will depend on the configuration of your computer.
ATRx Secure PunchIn™ Installation Guide - 2
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Acroprint ATRx Secure PunchIn
Summary of Contents for Acroprint ATRx Secure PunchIn
-
Page 1: Software Installation
Before You Start: 1. Ensure your computer meets the minimum BIOMETRIC FINGERPRINT TECHNOLOGY system requirements. See the product box or visit the Acroprint website at www.acroprint.com. 2. Verify package contents: Attendance Rx™ software ATRx Secure PunchIn™ fingerprint reader (FIU) - Page 2 Enable Biometrics in the Software The computer should display a message indicating that the new hardware was found. 5. Place the mouse in the check When the ‘Found New Hardware Wizard’ is displayed: box to the left of Enable 1. If the Wizard asks “Can Windows connect to Windows Update Attendance Rx Biometrics to search for Software?”, select “No, not this time”.
-
Page 3: Troubleshooting
Enrolling an Employee in the Software Troubleshooting To enroll an employee’s fingerprint: 1. Make sure Attendance Rx software is running In order for you to enable Biometrics functionality and enroll 1. Right click the System Tray Icon. employees the Attendance Rx software must be running. 2. -
Page 4: Additional Questions
Additional Questions A. Navigate to the Control Panel and find the Add/Remove Hardware icon. Please contact Acroprint’s Technical Support Department. B. Double click Add/Remove Hardware. OnLine Phone C. The Add/Remove Hardware display will appear. www.acroprint.com 1-800-334-7190 option 4 D. Click Next to begin the wizard.
Need help?
Do you have a question about the ATRx Secure PunchIn and is the answer not in the manual?
Questions and answers