Basic Operation - Electrolux ESF6281 User Information

Basic operation

This section contains basic information regarding the
use of your dishwasher. Please read this section very
carefully.
Programme menu
EAT-LOAD-RUN
70° INTENSIVE
ENERGY SAVING
The Programmes menu
• After switching on the dishwasher, you will find
yourself in the Programmes menu.
• Select your dishwashing cycle here using the Pro-
gram button. In the Info status bar your current po-
sition within the menu is shown.
The Options menu
• Using the Options button, go to the desired option.
In the Info status bar your current position within
the menu is displayed.
• For more detail about the options, refer to the re-
spective sections; for more about the 3 IN 1 op-
tion, see the section "Before using the appliance
for the first time".
• Use the Ok/Start button to switch from the menu
item SETTINGS... to the Settings sub-menu.
10
AUTOMATIC
45° GLASS
PRE-WASH
Options menu
The Settings sub-menu
Go to the desired setting here using the Options but-
ton. In the Info status bar your current position within
the sub-menu is shown.
• LANGUAGE
Set the language of the text line in the display; see
also section "Resetting the language".
• WATER HARDNESS
Set the value for water hardness electronically (val-
ue range 1 to 10).
• RINSE AID
If 3 IN 1 option is active: Activate or deactivate
rinse aid inflow
If 3 IN 1 option is not active: Rinse aid inflow is al-
ways switched on, even if with RINSE AID the val-
ue OFF is selected.
• BUZZER
Activate or deactivate audible beep
3
Using the Cancel button you can get back
from any setting to the 3 IN 1 option.
3 IN 1
KEY LOCK
SETTINGS...
button
Ok/Start
LANGUAGE
WATER HARDNESS
RINSE AID
BUZZER