16 Technical Specifications EN 55020/12.1994 EN 61000-3-2/4.1995 EN 61000-3-3/1.1995 Carsten Olesen Harman Kardon Europe 01/04 Typographic Conventions In order to help you use this manual with the remote control, front panel controls and rear panel connections, certain conventions have been used.
Thank you for choosing Harman Kardon Description and Features I Digital Output for Direct Connection to HD 755 CD player. The HD 755 is an exceptionally well-engineered Outboard Digital-to-Analog Converters product that offers high performance and ease I Sophisticated Programming Features to of use.
The carton and shipping materials used to pro- potential for safety hazards, place the unit on Your HD 755 has been designed for use with tect your new HD 755 during shipment were a firm and level surface. When placing the unit 230-volt AC current.
9 Intro Button: Press this button to put the may result. HD 755 in the Intro Scan mode. When you press 3 Remote Sensor Window: The sensor the button, the unit will play the first 10 seconds...
Kardon remote controlled device to have the signals of the HD 755. DO NOT connect this jack ble Harman Kardon product. This will enable the remote sensor on the HD 755 provide signals to to the standard audio inputs of any device.
B Button › Skip Buttons Search Buttons TRACK NO. Play Button › Stop Button Pause Button Random Button REPEAT Time Button Check Button RANDOM Open/Close Button Display Button CLEAR TIME CHECK SEARCH PROGRAM SKIP HD 755 REMOTE CONTROL FUNCTIONS 7...
Page 8
1 Power On: Press this button to turn on the on programming the HD 755.) point it was stopped. HD 755. Note that in order for the Power On 5 Repeat Button: Press this button once to C Random Button: Press this button to...
You may also use the IR Sensor in the HD 755 to ty to decode PCM digital input signals, connect send commands to other compatible remote the Digital Output jack ¡...
Load the disc in the tray with the printed (label) side facing up. Make certain that the disc is cen- To play a disc, first turn the HD 755 on using the To play all of the tracks on the disc in order, press tered in the tray.
Standby mode but its You may listen to the output of the HD 755 play just below the word TRACK. The elapsed power consumption is reduced to a low value. To...
Intro Search is in use. The Skip buttons may be used when the HD 755 is either playing or stopped. If the unit is stopped, the Skip buttons may be used to locate the first track to be played.
Program button 8 3 until the track to be specific programmed tracks after the program played, the HD 755 will stop. As long as the deleted from the program sequence appears in the Stop button 5 A has not been pressed twice was made.
The HD 755’s programming system enables you Repeat button !5 until the REPEAT and ming, the HD 755 will automatically go to the to repeat either a single track, the entire disc ALL indicators light up. When you see these indi-...
• Incorrect input • Make certain that the analog of the Audio Outputs ™ HD 755 are connected to a line level audio input, NOT to a digital audio or phono input. ERROR lights up continuously • Various • Turn the unit off and on again. If the problem persists, turn the in the display AC power to the HD 755 off and on.
Height measurement includes feet and chassis. All features and specifications are subject to change without notice. Harman Kardon is a registered trademark, and Power for the digital revolution is a trademark, of Harman Kardon, Inc. ® , High Definition Compatible Digital ®...